[rancid] End of run not found

[Alfredo Jo]

Thank you, i am looking into it as well, might take me a while to figure it
out, Here is the output of the f10rancid -d run:


PROMPT MATCH: SF-LAN2#

HIT COMMAND:SF-LAN2#show version

    In ShowVersion: SF-LAN2#show version

HIT COMMAND:SF-LAN2#show bootvar

    In ShowBoot: SF-LAN2#show bootvar

HIT COMMAND:SF-LAN2#dir flash:

    In DirSlotN: SF-LAN2#dir flash:

HIT COMMAND:SF-LAN2#dir slot0:

    In DirSlotN: SF-LAN2#dir slot0:

HIT COMMAND:SF-LAN2#show chassis

    In ShowChassis: SF-LAN2#show chassis

HIT COMMAND:SF-LAN2#show system

    In ShowChassis: SF-LAN2#show system

HIT COMMAND:SF-LAN2#show inventory

    In ShowInventory: SF-LAN2#show inventory

HIT COMMAND:SF-LAN2#show vlan

    In ShowVLAN: SF-LAN2#show vlan

HIT COMMAND:SF-LAN2#show running

    In WriteTerm: SF-LAN2#show running

10.0.0.251: End of run not found

10.0.0.251: End of run not found




On Mon, Jun 1, 2015 at 3:03 PM, Alan McKinnon <alan.mckinnon at gmail.com>
wrote:

> On 01/06/2015 19:46, Alfredo Jo wrote:
> > Hello,
> >
> > I am running rancid 3.2. backing up various switches. I have a Dell
> > switch N3048 which used to back up but for some reason it has stopped
> > and the logs now show the following:
> >
> > Trying to get all of the configs.
> >
> > 10.0.0.251 <http://10.0.0.251>: End of run not found
> >
> > =====================================
> >
> > Getting missed routers: round 1.
> >
> > 10.0.0.251 <http://10.0.0.251>: End of run not found
> >
> > =====================================
> >
> > Getting missed routers: round 2.
> >
> > 10.0.0.251 <http://10.0.0.251>: End of run not found
> >
> > =====================================
> >
> > Getting missed routers: round 3.
> >
> > 10.0.0.251 <http://10.0.0.251>: End of run not found
> >
> > =====================================
> >
> > Getting missed routers: round 4.
> >
> > 10.0.0.251 <http://10.0.0.251>: End of run not found
> >
> >
> >
> > my router.db show:
> >
> > 10.0.0.251;force10;up
> >
> > I am using force10 because its the only dell one in the list of devices
> >
> > my .clogin info is:
> >
> > #Dell N3048  Stack
> >
> > add method 10.0.0.251         ssh
> >
> > add user 10.0.0.251           adminusername
> >
> > add password 10.0.0.251      {userPassword} {enablepassword}
> >
> >
> > As always very grateful for all the help.
>
>
> Your posted configs are correct, so we can rule out the usual typos etc.
> I assume that 10.0.0.251 in your output formatted as a URL is some
> artifact of mailers and is not present in the actual output?
>
> My usual faultfinding at this point:
>
> - make sure there is no "#" or ">" characters in the router prompt (I
> believe recent rancid has improved this area and error handling)
> - find out if the router or rancid was updated/changed co-incident with
> when the backups started failing
> - run f10rancid with the -d option so you can see what is really going
> on. The clogin command used is often output right at the top so if -d
> doesn't cut it, run that clogin command to get the entire output
> including the details f10rancid doesn't echo to stdout
>
> --
> Alan McKinnon
> alan.mckinnon at gmail.com
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20150601/4769e70f/attachment.html>