[rancid] Palo Alto issue

[heasley]

Wed, Sep 09, 2015 at 10:03:41PM +0000, Daren McGill:
> I just upgraded to 3.2 as Palo Alto was now integrated ran into the following issue. If I run the command in rancid it goes to run the right command but comes back with nothing. However if I run the command for panlogin direct it works great. See output below.

have you applied the patch for 3.2 from the ftp site?

> [rancid at lei-tac-prd-254 ~]$ export NOPIPE=YES; rancid -d -t paloalto crp01-pan02
> loadtype: device type paloalto
> loadtype: found device type paloalto in /usr/local/rancid/etc/rancid.types.base
> executing panlogin -t 90 -c"set cli scripting-mode on;set cli pager off;show system info;show config running" crp01-pan02
> crp01-pan02: missed cmd(s): all commands
> crp01-pan02: End of run not found
> crp01-pan02: End of run not found
> 
> 
> [rancid at lei-tac-prd-254 ~]$ panlogin -t 90 -c"set cli scripting-mode on;set cli pager off;show system info;show config running" crp01-pan02
> crp01-pan02
> spawn ssh -c 3des -x -l svc-rancid crp01-pan02
> Password:
> Last login: Wed Sep  9 15:59:34 2015 from 10.2.10.254
> Welcome svc-rancid.
> 
> svc-rancid at CRP01-PAN02(active)>
> svc-rancid at CRP01-PAN02(active)>
> svc-rancid at CRP01-PAN02(active)> set cli scripting-mode on
> svc-rancid at CRP01-PAN02(active)> set cli pager off
> svc-rancid at CRP01-PAN02(active)> show system info
> 
> hostname: CRP01-PAN02
> 
> The config scrolls after this with no issues.
> 
> Thanks,
> Daren

> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss