[rancid] HP 1920

[heasley]

Mon, Feb 15, 2016 at 10:05:15AM +0000, Jethro R Binks:
> On Mon, 15 Feb 2016, Viktor Steinmann wrote:
> 
> > I'd like to take up the discussion from June 2015 about HP 1920 switches.
> > 
> > > http://www.shrubbery.net/pipermail/rancid-discuss/2015-June/008557.html
> > 
> > I have purchased some of these switches as well, and in fact the Web interface
> > and the CLI suck. But you can get to a full CLI with some extra commands:
> > 
> > a) Enter "_cmdline-mode on"
> > b) The switch answers with "All commands can be displayed and executed.
> > Continue? [Y/N]" on which you answer with "Y"
> > c) The switch will answer with the password prompt: "Please input password:"
> > d) The password to enter here is "Jinhua1920unauthorized"
> 
> That's a new one.  It used to be "512900" on the 1910s (at least).

this sounds ugly.  someone would have to provide me access to one in order for
me to help with adding support - if its reasonable once in "full cli" mode.

> I haven't had any time to review my hacks to get this handled by Rancid 3 
> I'm afraid :( .
> 
> Jethro.
> 
> .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
> Jethro R Binks, Network Manager,
> Information Services Directorate, University Of Strathclyde, Glasgow, UK
> 
> The University of Strathclyde is a charitable body, registered in
> Scotland, number SC015263.
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss