[rancid] HP 1920

[Jethro R Binks]

On Mon, 15 Feb 2016, Viktor Steinmann wrote:

> I'd like to take up the discussion from June 2015 about HP 1920 switches.
> 
> > http://www.shrubbery.net/pipermail/rancid-discuss/2015-June/008557.html
> 
> I have purchased some of these switches as well, and in fact the Web interface
> and the CLI suck. But you can get to a full CLI with some extra commands:
> 
> a) Enter "_cmdline-mode on"
> b) The switch answers with "All commands can be displayed and executed.
> Continue? [Y/N]" on which you answer with "Y"
> c) The switch will answer with the password prompt: "Please input password:"
> d) The password to enter here is "Jinhua1920unauthorized"

That's a new one.  It used to be "512900" on the 1910s (at least).

I haven't had any time to review my hacks to get this handled by Rancid 3 
I'm afraid :( .

Jethro.

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
Jethro R Binks, Network Manager,
Information Services Directorate, University Of Strathclyde, Glasgow, UK

The University of Strathclyde is a charitable body, registered in
Scotland, number SC015263.