[rancid] HP 1920

[heasley]

Thu, Oct 15, 2015 at 11:31:30PM +0000, Michael Newton:
> Wondering if anything ever came of this effort? We recently had to take over management of some of these switches and would like to get the configs saved to RANCID. Thanks!

I have not touched it; I've never even touched one of these - comware sounds
scary.  If folks wanted this support, you will have to provide remote access
to one.

> Mike
> 
> I've done some experimental work on this with rancid 3, at the moment it  
> relies on some changes to core rancid which I need to think through and  
> feedback to the project, and I haven't looked at it in a while.  I know I  
> won't get a chance to do so for a while yet either unfortunately. 
>  
> For the record, this is an HP Comware switch, but is one of a set of  
> models that has a fairly useless limited CLI, unless you enter the secret  
> command and magic code to enable access to the full CLI, which requires  
> the special handling. 
>  
> Jethro. 
>  
>  
>  
> On Tue, 30 Jun 2015, Andrea Venturoli wrote: 
>  
> > Hello. 
> >  
> > I've got a couple of HP 1920 switches I'd like Rancid to connect to. 
> >  
> > However what I get is: 
> > > /usr/local/libexec/rancid/clogin switch-ufficio.xxxxxxx 
> > > switch-ufficio.xxxxxxx 
> > > spawn telnet switch-ufficio.xxxxxxx 
> > > Trying 192.168.110.10... 
> > > Connected to switch-ufficio.xxxxxxx. 
> > > Escape character is '^]'. 
> > >  
> > > ****************************************************************************** 
> > > * Copyright (c) 2010-2015 Hewlett-Packard Development Company, L.P. 
> > > * 
> > > * Without the owner's prior written consent, 
> > > * 
> > > * no decompiling or reverse-engineering shall be allowed. 
> > > * 
> > > ****************************************************************************** 
> > >  
> > >  
> > > Login authentication 
> > >  
> > >  
> > > Username:admin 
> > > Password: 
> > > <Switch Ufficio xxxxxxx>enable 
> > >                         ^ 
> > >  % Unrecognized command found at '^' position. 
> > > <Switch Ufficio xxxxxxx>^C$ 
> >  
> > I believe the command "enable" has to be substituted with "_cmdline-mode on", 
> > but found no driver implementing this. 
> >  
> > Does such a driver exist? 
> > Anyone using this switch (or any similar one)? 
> >  
> >  bye & Thanks 
> >       av. 
> > _______________________________________________ 
> > Rancid-discuss mailing list 
> > Rancid-discuss [at] shrubbery 
> > http://www.shrubbery.net/mailman/listinfo/rancid-discuss 
> >  
>  
> .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
> Jethro R Binks, Network Manager, 
> Information Services Directorate, University Of Strathclyde, Glasgow, UK 
>  
> The University of Strathclyde is a charitable body, registered in 
> Scotland, number SC015263. 
> _______________________________________________ 
> Rancid-discuss mailing list 
> Rancid-discuss [at] shrubbery 
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
> 
> 
> 



> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss