[rancid] Rancid - cmwlogin - HPE switches

[Ugo Bellavance]

Have you read this
https://sites.google.com/site/jrbinks/code/rancid/cmwrancid ?

You may want to read this thread:
http://www.shrubbery.net/pipermail/rancid-discuss/2018-February/010065.html

On Wed, Oct 23, 2019 at 3:57 PM henri hemery <henri.hemery at gmail.com> wrote:

> Hi,
>
>
>
> I would like to know if some of you succeeded in backing UP HPE switches.
>
> I successfully backed up HP FF 7910, HP 2530, but no way to back up HPE
> 5130 and HP 5120.
>
>
>
> If I type this command:
>
>
>
>
>
> *[rancid at cardlswbkp1 bin]$ ./cmwlogin -c "display version" 10.1.170.1*
>
> *10.1.170.1*
>
> *spawn telnet 10.1.170.1*
>
> *Trying 10.1.170.1...*
>
> *Connected to 10.1.170.1.*
>
> *Escape character is '^]'.*
>
>
>
>
> ********************************************************************************
>
> ** Copyright (c) 2010-2017 Hewlett Packard Enterprise Development
> LP          **
>
> ** Without the owner's prior written
> consent,                                 **
>
> ** no decompiling or reverse-engineering shall be
> allowed.                    **
>
>
> ********************************************************************************
>
>
>
> *login: [login]*
>
> *Password:*
>
> *<MGMSW1>undo smart*
>
> *             ^*
>
> *% Unrecognized command found at '^' position.*
>
> *<MGMSW1>undo interactive*
>
> *             ^*
>
> *% Unrecognized command found at '^' position.*
>
> *<MGMSW1>undo terminal monitor*
>
> *The current terminal is disabled to display logs.*
>
> *<MGMSW1>*
>
> *<MGMSW1>terminal length 0*
>
> *                 ^*
>
> *% Unrecognized command found at '^' position.*
>
> *<MGMSW1>terminal width 132*
>
> *                 ^*
>
> *% Unrecognized command found at '^' position.*
>
> *<MGMSW1>display version*
>
> *HPE Comware Software, Version 7.1.070, Release 3208P03*
>
> *Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP*
>
> *HPE 5130 24G PoE+ 4SFP+ EI Switch uptime is 10 weeks, 4 days, 6 hours, 28
> minutes*
>
> *Last reboot reason : Cold reboot*
>
>
>
> *####suppressed output###*
>
>
>
> *Boot image: flash:/5130ei-cmw710-boot-r3208p03.bin*
>
> *Boot image version: 7.1.070, Release 3208P03*
>
> *  Compiled Dec 14 2017 18:00:00*
>
> *System image: flash:/5130ei-cmw710-system-r3208p03.bin*
>
> *System image version: 7.1.070, Release 3208P03*
>
> *  Compiled Dec 14 2017 18:00:00*
>
>
>
> *<MGMSW1>exit*
>
> *Connection closed by foreign host.*
>
> *[rancid at cardlswbkp1 bin]$*
>
>
>
> It work. But I launch rancid-run, I never receive the output.
>
>
>
> When I type: ./cmwlogin -dl 10.1.170.1, the output is stocked here:
>
>
>
>
>
> *expect: does "" (spawn_id exp6) match regular expression "[\r\n]+"? (No
> Gate, RE only) gate=yes re=no*
>
> *"^(.+[:.])1 ((>\u0007?|#| \(enable\)))"? (No Gate, RE only) gate=yes
> re=no*
>
> *"^.+(>\u0007?|#| \(enable\))"? (No Gate, RE only) gate=yes re=no*
>
> *<MGMSW1>*
>
> *expect: does "<MGMSW1>" (spawn_id exp6) match regular expression
> "[\r\n]+"? (No Gate, RE only) gate=yes re=no*
>
> *"^(.+[:.])1 ((>\u0007?|#| \(enable\)))"? (No Gate, RE only) gate=yes
> re=no*
>
> *"^.+(>\u0007?|#| \(enable\))"? (No Gate, RE only) gate=yes re=yes*
>
> *expect: set expect_out(0,string) "<MGMSW1>"*
>
> *expect: set expect_out(1,string) ">"*
>
> *expect: set expect_out(spawn_id) "exp6"*
>
> *expect: set expect_out(buffer) "<MGMSW1>"*
>
> *tty_raw_noecho: was raw = 0  echo = 1*
>
>
>
> Anybody can help?
>
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>


-- 
Ugo Bellavance (ugob at lubik.ca)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20191023/9ad8e65d/attachment.html>