[rancid] Rancid - cmwlogin - HPE switches

[henri hemery]

Hi,



I would like to know if some of you succeeded in backing UP HPE switches.

I successfully backed up HP FF 7910, HP 2530, but no way to back up HPE
5130 and HP 5120.



If I type this command:





*[rancid at cardlswbkp1 bin]$ ./cmwlogin -c "display version" 10.1.170.1*

*10.1.170.1*

*spawn telnet 10.1.170.1*

*Trying 10.1.170.1...*

*Connected to 10.1.170.1.*

*Escape character is '^]'.*



********************************************************************************

** Copyright (c) 2010-2017 Hewlett Packard Enterprise Development
LP          **

** Without the owner's prior written
consent,                                 **

** no decompiling or reverse-engineering shall be
allowed.                    **

********************************************************************************



*login: [login]*

*Password:*

*<MGMSW1>undo smart*

*             ^*

*% Unrecognized command found at '^' position.*

*<MGMSW1>undo interactive*

*             ^*

*% Unrecognized command found at '^' position.*

*<MGMSW1>undo terminal monitor*

*The current terminal is disabled to display logs.*

*<MGMSW1>*

*<MGMSW1>terminal length 0*

*                 ^*

*% Unrecognized command found at '^' position.*

*<MGMSW1>terminal width 132*

*                 ^*

*% Unrecognized command found at '^' position.*

*<MGMSW1>display version*

*HPE Comware Software, Version 7.1.070, Release 3208P03*

*Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP*

*HPE 5130 24G PoE+ 4SFP+ EI Switch uptime is 10 weeks, 4 days, 6 hours, 28
minutes*

*Last reboot reason : Cold reboot*



*####suppressed output###*



*Boot image: flash:/5130ei-cmw710-boot-r3208p03.bin*

*Boot image version: 7.1.070, Release 3208P03*

*  Compiled Dec 14 2017 18:00:00*

*System image: flash:/5130ei-cmw710-system-r3208p03.bin*

*System image version: 7.1.070, Release 3208P03*

*  Compiled Dec 14 2017 18:00:00*



*<MGMSW1>exit*

*Connection closed by foreign host.*

*[rancid at cardlswbkp1 bin]$*



It work. But I launch rancid-run, I never receive the output.



When I type: ./cmwlogin -dl 10.1.170.1, the output is stocked here:





*expect: does "" (spawn_id exp6) match regular expression "[\r\n]+"? (No
Gate, RE only) gate=yes re=no*

*"^(.+[:.])1 ((>\u0007?|#| \(enable\)))"? (No Gate, RE only) gate=yes re=no*

*"^.+(>\u0007?|#| \(enable\))"? (No Gate, RE only) gate=yes re=no*

*<MGMSW1>*

*expect: does "<MGMSW1>" (spawn_id exp6) match regular expression
"[\r\n]+"? (No Gate, RE only) gate=yes re=no*

*"^(.+[:.])1 ((>\u0007?|#| \(enable\)))"? (No Gate, RE only) gate=yes re=no*

*"^.+(>\u0007?|#| \(enable\))"? (No Gate, RE only) gate=yes re=yes*

*expect: set expect_out(0,string) "<MGMSW1>"*

*expect: set expect_out(1,string) ">"*

*expect: set expect_out(spawn_id) "exp6"*

*expect: set expect_out(buffer) "<MGMSW1>"*

*tty_raw_noecho: was raw = 0  echo = 1*



Anybody can help?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20191023/7e176ed1/attachment.html>