[rancid] Fwd: Rancid - cmwlogin - HPE switches
Kevin Olbrich
ko at sv01.de
Fri Oct 25 09:19:01 UTC 2019
Are you using a recent release of rancid, eg. 3.9?
As these scripts did not work for me and the switch stack does not get many
updates, I simply backed them up myself in the past.
All other devices worked fine.
Kind regards
Kevin
Am Do., 24. Okt. 2019 um 20:29 Uhr schrieb henri hemery <
henri.hemery at gmail.com>:
>
> I think I found the solution.
>>
>> I finally can use h3clogin//h3crancid work for my HPE 5130.
>> Here is what I modified in the file h3crancid:
>>
>> I had to modify the first line by this:
>>
>> #! /usr/bin/perl5.16.3 --» Because it is what we have in
>> /usr/bin
>>
>> And I also modified this line:
>>
>> my $logincmd = "/usr/local/rancid/bin/h3clogin"; --» because the
>> script was unable to locate h3clogin
>>
>> Thanks for your help all!
>>
>>
>>
>> On Thu, Oct 24, 2019 at 10:27 AM Ugo Bellavance <ugob at lubik.ca> wrote:
>>
>>> There is no such file on my version (2.3).
>>>
>>> In 2.3, the config was in rancid-fe, I think and it looked like this:
>>>
>>> 'h3c' => 'h3crancid',
>>>
>>> The login command was defined it the *rancid script:
>>>
>>> my $logincmd = "h3clogin";
>>>
>>>
>>> On Thu, Oct 24, 2019 at 8:55 AM henri hemery <henri.hemery at gmail.com>
>>> wrote:
>>>
>>>> Thanks Ugo, so you modified /usr/local/rancid/etc/rancid.types.conf
>>>> like this? :
>>>>
>>>> h3c;script;h3crancid -t cmw
>>>> h3c;login;h3clogin
>>>>
>>>> On Thu, Oct 24, 2019 at 8:11 AM Ugo Bellavance <ugob at lubik.ca> wrote:
>>>>
>>>>> I don't know if that helps, but I'm running rancid with a 5120, but
>>>>> I'm using h3crancid, because I use an old version of rancid.
>>>>>
>>>>> Regards
>>>>>
>>>>> On Thu, Oct 24, 2019 at 8:07 AM henri hemery <henri.hemery at gmail.com>
>>>>> wrote:
>>>>>
>>>>>>
>>>>>>> Have you read this
>>>>>>> https://sites.google.com/site/jrbinks/code/rancid/cmwrancid ?
>>>>>>>
>>>>>>> Yes, I dicovered cmwlogin from this page and I followed every step,
>>>>>> but I think this module is not for every type of comware 7 devices
>>>>>>
>>>>>>
>>>>>>> You may want to read this thread:
>>>>>>> http://www.shrubbery.net/pipermail/rancid-discuss/2018-February/010065.html
>>>>>>>
>>>>>>
>>>>>> Yes I read that thread, not so much to learn from..But I gonna try to
>>>>>> get in touch with the person.
>>>>>>
>>>>>>>
>>>>>>> On Wed, Oct 23, 2019 at 3:57 PM henri hemery <henri.hemery at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> I would like to know if some of you succeeded in backing UP HPE
>>>>>>>> switches.
>>>>>>>>
>>>>>>>> I successfully backed up HP FF 7910, HP 2530, but no way to back up
>>>>>>>> HPE 5130 and HP 5120.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> If I type this command:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *[rancid at cardlswbkp1 bin]$ ./cmwlogin -c "display version"
>>>>>>>> 10.1.170.1*
>>>>>>>>
>>>>>>>> *10.1.170.1*
>>>>>>>>
>>>>>>>> *spawn telnet 10.1.170.1*
>>>>>>>>
>>>>>>>> *Trying 10.1.170.1...*
>>>>>>>>
>>>>>>>> *Connected to 10.1.170.1.*
>>>>>>>>
>>>>>>>> *Escape character is '^]'.*
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ********************************************************************************
>>>>>>>>
>>>>>>>> ** Copyright (c) 2010-2017 Hewlett Packard Enterprise Development
>>>>>>>> LP **
>>>>>>>>
>>>>>>>> ** Without the owner's prior written
>>>>>>>> consent, **
>>>>>>>>
>>>>>>>> ** no decompiling or reverse-engineering shall be
>>>>>>>> allowed. **
>>>>>>>>
>>>>>>>>
>>>>>>>> ********************************************************************************
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *login: [login]*
>>>>>>>>
>>>>>>>> *Password:*
>>>>>>>>
>>>>>>>> *<MGMSW1>undo smart*
>>>>>>>>
>>>>>>>> * ^*
>>>>>>>>
>>>>>>>> *% Unrecognized command found at '^' position.*
>>>>>>>>
>>>>>>>> *<MGMSW1>undo interactive*
>>>>>>>>
>>>>>>>> * ^*
>>>>>>>>
>>>>>>>> *% Unrecognized command found at '^' position.*
>>>>>>>>
>>>>>>>> *<MGMSW1>undo terminal monitor*
>>>>>>>>
>>>>>>>> *The current terminal is disabled to display logs.*
>>>>>>>>
>>>>>>>> *<MGMSW1>*
>>>>>>>>
>>>>>>>> *<MGMSW1>terminal length 0*
>>>>>>>>
>>>>>>>> * ^*
>>>>>>>>
>>>>>>>> *% Unrecognized command found at '^' position.*
>>>>>>>>
>>>>>>>> *<MGMSW1>terminal width 132*
>>>>>>>>
>>>>>>>> * ^*
>>>>>>>>
>>>>>>>> *% Unrecognized command found at '^' position.*
>>>>>>>>
>>>>>>>> *<MGMSW1>display version*
>>>>>>>>
>>>>>>>> *HPE Comware Software, Version 7.1.070, Release 3208P03*
>>>>>>>>
>>>>>>>> *Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP*
>>>>>>>>
>>>>>>>> *HPE 5130 24G PoE+ 4SFP+ EI Switch uptime is 10 weeks, 4 days, 6
>>>>>>>> hours, 28 minutes*
>>>>>>>>
>>>>>>>> *Last reboot reason : Cold reboot*
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *####suppressed output###*
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *Boot image: flash:/5130ei-cmw710-boot-r3208p03.bin*
>>>>>>>>
>>>>>>>> *Boot image version: 7.1.070, Release 3208P03*
>>>>>>>>
>>>>>>>> * Compiled Dec 14 2017 18:00:00*
>>>>>>>>
>>>>>>>> *System image: flash:/5130ei-cmw710-system-r3208p03.bin*
>>>>>>>>
>>>>>>>> *System image version: 7.1.070, Release 3208P03*
>>>>>>>>
>>>>>>>> * Compiled Dec 14 2017 18:00:00*
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *<MGMSW1>exit*
>>>>>>>>
>>>>>>>> *Connection closed by foreign host.*
>>>>>>>>
>>>>>>>> *[rancid at cardlswbkp1 bin]$*
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> It work. But when I launch rancid-run, I never receive the output.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> When I type: ./cmwlogin -dl 10.1.170.1, the output is stocked here:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *expect: does "" (spawn_id exp6) match regular expression
>>>>>>>> "[\r\n]+"? (No Gate, RE only) gate=yes re=no*
>>>>>>>>
>>>>>>>> *"^(.+[:.])1 ((>\u0007?|#| \(enable\)))"? (No Gate, RE only)
>>>>>>>> gate=yes re=no*
>>>>>>>>
>>>>>>>> *"^.+(>\u0007?|#| \(enable\))"? (No Gate, RE only) gate=yes re=no*
>>>>>>>>
>>>>>>>> *<MGMSW1>*
>>>>>>>>
>>>>>>>> *expect: does "<MGMSW1>" (spawn_id exp6) match regular expression
>>>>>>>> "[\r\n]+"? (No Gate, RE only) gate=yes re=no*
>>>>>>>>
>>>>>>>> *"^(.+[:.])1 ((>\u0007?|#| \(enable\)))"? (No Gate, RE only)
>>>>>>>> gate=yes re=no*
>>>>>>>>
>>>>>>>> *"^.+(>\u0007?|#| \(enable\))"? (No Gate, RE only) gate=yes re=yes*
>>>>>>>>
>>>>>>>> *expect: set expect_out(0,string) "<MGMSW1>"*
>>>>>>>>
>>>>>>>> *expect: set expect_out(1,string) ">"*
>>>>>>>>
>>>>>>>> *expect: set expect_out(spawn_id) "exp6"*
>>>>>>>>
>>>>>>>> *expect: set expect_out(buffer) "<MGMSW1>"*
>>>>>>>>
>>>>>>>> *tty_raw_noecho: was raw = 0 echo = 1*
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Anybody can help?
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Rancid-discuss mailing list
>>>>>>>> Rancid-discuss at shrubbery.net
>>>>>>>> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Ugo Bellavance (ugob at lubik.ca)
>>>>>>> _______________________________________________
>>>>>>> Rancid-discuss mailing list
>>>>>>> Rancid-discuss at shrubbery.net
>>>>>>> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> Ugo Bellavance (ugob at lubik.ca)
>>>>>
>>>>
>>>
>>> --
>>> Ugo Bellavance (ugob at lubik.ca)
>>>
>>
>
> --
> Ugo Bellavance (ugob at lubik.ca)
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20191025/6bfca279/attachment.htm>
More information about the Rancid-discuss
mailing list