[rancid] Issues with Brocade/Foundry and missing commands

[Brad Bendy]

Yup. Tried SSH/telnet as well. It seems to me like some EOL thing not
working, but then again when flogin runs it executes all the commands
so if it was seeing EOL and the prompt it would not issue the next set
of commands.

On Sat, Feb 13, 2021 at 4:10 PM Craig Hopkins <c.o.hopkins at gmail.com> wrote:
>
> Do you have them as the foundry type in your router.db? I've run rancid against netiron and turboiron boxes without issue. ICX should be the same.
>
> Craig
>
> On Sat, 13 Feb 2021, 23:07 Brad Bendy, <brad.bendy at gmail.com> wrote:
>>
>> Hi,
>>
>> I've got a rancid 3.7 box and having issues with Brocade ICX 6610s and
>> some older FESX switches. flogin works fine and shows all the commands
>> being ran and dumps all data with zero issues. Soon as I run
>> rancid-run or rancid manually I am getting "missed cmd(s): show flash"
>> which is the first command, and no configs get saved obviously.
>>
>> I am not sure what else to try since the commands manually show fine
>> with no issues. I have seen some mailing list posts about
>> Brocade/Foundry stopped working in later releases but then see some
>> that say they work fine.
>>
>> Any pointers would be appreciated.
>>
>> Thanks!
>>
>> _______________________________________________
>> Rancid-discuss mailing list
>> Rancid-discuss at www.shrubbery.net
>> https://www.shrubbery.net/mailman/listinfo/rancid-discuss