[rancid] Issues with Brocade/Foundry and missing commands

[Craig Hopkins]

Do you have them as the foundry type in your router.db? I've run rancid
against netiron and turboiron boxes without issue. ICX should be the same.

Craig

On Sat, 13 Feb 2021, 23:07 Brad Bendy, <brad.bendy at gmail.com> wrote:

> Hi,
>
> I've got a rancid 3.7 box and having issues with Brocade ICX 6610s and
> some older FESX switches. flogin works fine and shows all the commands
> being ran and dumps all data with zero issues. Soon as I run
> rancid-run or rancid manually I am getting "missed cmd(s): show flash"
> which is the first command, and no configs get saved obviously.
>
> I am not sure what else to try since the commands manually show fine
> with no issues. I have seen some mailing list posts about
> Brocade/Foundry stopped working in later releases but then see some
> that say they work fine.
>
> Any pointers would be appreciated.
>
> Thanks!
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at www.shrubbery.net
> https://www.shrubbery.net/mailman/listinfo/rancid-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20210213/5852aa63/attachment.htm>