[tac_plus] Re: Access directly to enable mode

[Barry Stephen (YDD08) Derwent Shared Services]

do you have a line for exec authorization, something like this:

aaa authorization exec default group tacacs+

I believe you need this otherwise your priv level will not take effect.

-----Original Message-----
From: tac_plus-bounces at shrubbery.net
[mailto:tac_plus-bounces at shrubbery.net] On Behalf Of Kiss Gabor (Bitman)
Sent: 08 April 2009 16:57
To: luismi
Cc: tac_plus at shrubbery.net
Subject: [tac_plus] Re: Access directly to enable mode

> UPPPS fixed but,tacacs server restarted and same result :P

The very same tac-plus config works for me since years.
Maybe the router configuration differs.

Regards

Gabor
_______________________________________________
tac_plus mailing list
tac_plus at shrubbery.net
http://www.shrubbery.net/mailman/listinfo.cgi/tac_plus

DISCLAIMER - This email and any file transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed.  Any views or opinions expressed are those of the author and do not represent the views of Derwent Shared Services, unless otherwise explicitly stated. The information contained in this email may be subject to public disclosure under the Freedom of Information Act 2000. Unless the information is legally exempt from disclosure, the confidentiality of this email cannot be guaranteed.

Derwent Shared Services is an NHS Shared Services Organisation.