[tac_plus] Re: Access directly to enable mode

[luismi]

I have this one:

aaa authorization exec default group tacacs+ if-authenticated 



El mié, 08-04-2009 a las 17:08 +0100, Barry Stephen (YDD08) Derwent
Shared Services escribió:
> do you have a line for exec authorization, something like this:
> 
> aaa authorization exec default group tacacs+
> 
> I believe you need this otherwise your priv level will not take effect.
> 
> -----Original Message-----
> From: tac_plus-bounces at shrubbery.net
> [mailto:tac_plus-bounces at shrubbery.net] On Behalf Of Kiss Gabor (Bitman)
> Sent: 08 April 2009 16:57
> To: luismi
> Cc: tac_plus at shrubbery.net
> Subject: [tac_plus] Re: Access directly to enable mode
> 
> > UPPPS fixed but,tacacs server restarted and same result :P
> 
> The very same tac-plus config works for me since years.
> Maybe the router configuration differs.
> 
> Regards
> 
> Gabor
> _______________________________________________
> tac_plus mailing list
> tac_plus at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/tac_plus
> 
> DISCLAIMER - This email and any file transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed.  Any views or opinions expressed are those of the author and do not represent the views of Derwent Shared Services, unless otherwise explicitly stated. The information contained in this email may be subject to public disclosure under the Freedom of Information Act 2000. Unless the information is legally exempt from disclosure, the confidentiality of this email cannot be guaranteed.
> 
> Derwent Shared Services is an NHS Shared Services Organisation.
> _______________________________________________
> tac_plus mailing list
> tac_plus at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/tac_plus