Multithreading

This chapter describes the locking primitives and thread synchronization mechanisms of the Solaris multithreaded kernel. Device drivers should be designed to take advantage of multithreading. This chapter provides information on the following subjects:

• "Locking Primitives"

• "Thread Synchronization"

• "Choosing a Locking Scheme"

Locking Primitives

In traditional UNIX systems, every section of kernel code runs until it explicitly gives up the processor by calling sleep(1) or is interrupted by hardware. This is not true in the Solaris operating environment. A kernel thread can be preempted at any time to run another thread. Because all kernel threads share kernel address space and often need to read and modify the same data, the kernel provides a number of locking primitives to prevent threads from corrupting shared data. These mechanisms include mutual exclusion locks (or mutex), readers/writer locks, and semaphores.

Storage Classes of Driver Data

The storage class of data is a guide to whether the driver might need to take explicit steps to control access to the data. The three types of data storage classes are:

• Automatic (stack) data - Every thread has a private stack, so drivers never need to lock automatic variables.

• Global and static data - Global and static data can be shared by any number of threads in the driver; the driver might need to lock this type of data at times.

• Kernel heap data - Any number of threads in the driver might share kernel heap data, such as data allocated by kmem_alloc(9F). If this data is shared, the driver needs to protect it at times.

Mutual-Exclusion Locks

A mutual-exclusion lock, or mutex, is usually associated with a set of data and regulates access to that data. Mutexes provide a way to allow only one thread at a time access to that data.

Table 3-1 Mutex Routines

Setting Up Mutexes

Device drivers usually allocate a mutex for each driver data structure. The mutex is typically a field in the structure and is of type kmutex_t. mutex_init(9F) is called to prepare the mutex for use. This is usually done at attach(9E) time for per-device mutexes and _init(9E) time for global driver mutexes.

For example,

struct xxstate *xsp;
...
mutex_init(&xsp->mu, NULL, MUTEX_DRIVER, NULL);
...

For a more complete example of mutex initialization, see Chapter 5, Driver Autoconfiguration.

The driver must destroy the mutex with mutex_destroy(9F) before being unloaded. This is usually done at detach(9E) time for per-device mutexes and _fini(9E) time for global driver mutexes.

Using Mutexes

Every section of the driver code that needs to read or write the shared data structure must do the following:

• Acquire the mutex

• Access the data

• Release the mutex

The scope of a mutex--the data it protects--is entirely up to the programmer. A mutex protects some particular data structure because the programmer chooses to do so and uses it accordingly. A mutex protects a data structure only if every code path that accesses the data structure does so while holding the mutex.

Readers/Writer Locks

A readers/writer lock regulates access to a set of data. The readers/writer lock is so called because many threads can hold the lock simultaneously for reading, but only one thread can hold it for writing.

Most device drivers do not use readers/writer locks. These locks are slower than mutexes and provide a performance gain only when protecting data that is not frequently written but is commonly read by many concurrent threads. In this case, contention for a mutex could become a bottleneck, so using a readers/writer lock might be more efficient. The readers/writer functions are summarized in the following table. See the rwlock(9F) man page for detailed information.

Table 3-2 Readers/Writer Locks

Semaphores

Counting semaphores are available as an alternative primitive for managing threads within device drivers. See the semaphore(9F) man page for more information.

Table 3-3 Semaphores

Thread Synchronization

In addition to protecting shared data, drivers often need to synchronize execution among multiple threads.

Condition Variables in Thread Synchronization

Condition variables are a standard form of thread synchronization. They are designed to be used with mutexes. The associated mutex is used to ensure that a condition can be checked atomically, and that the thread can block on the associated condition variable without missing either a change to the condition or a signal that the condition has changed.

Table 3-4 lists the condvar(9F) interfaces.

Table 3-4 Condition Variable Routines