To Add Files With a Finish Script

Through a finish script, you can add files from the JumpStart directory to an already installed system. You can add the files because the JumpStart directory is mounted on the directory that is specified by the SI_CONFIG_DIR variable. The directory is set to /tmp/install_config by default.

Note - You can also replace files by copying files from the JumpStart directory to already existing files on the installed system.

1. Copy all of the files that you are adding to the installed system to the JumpStart directory.

2. Insert the following line in the finish script for each file that you want to be copied to the newly installed file system hierarchy:

   cp ${SI_CONFIG_DIR}/file_name /a/path_name

For example, assume you have a special application, site_prog, developed for all users at your site. If you place a copy of site_prog into the JumpStart directory, the following line in a finish script copies site_prog from the JumpStart directory into a system's /usr/bin directory:

cp ${SI_CONFIG_DIR}/site_prog /a/usr/bin

Adding Packages or Patches With a Finish Script

You can create a finish script to automatically add packages or patches after the Solaris software is installed on a system. By adding packages with a finish script, you reduce time and ensure consistency in what packages and patches are installed on different systems at your site.

When you use the pkgadd(1M) or patchadd(1M) commands in finish scripts, use the -R option to specify /a as the root path.

Example 24-2 shows an example of a finish script that adds packages.

Example 24-2 Adding Packages With a Finish Script

  #!/bin/sh
 
  BASE=/a
  MNT=/a/mnt
  ADMIN_FILE=/a/tmp/admin
 
  mkdir ${MNT}
  mount -f nfs sherlock:/export/package ${MNT}1
  cat >${ADMIN_FILE} <<DONT_ASK2
  mail=root
  instance=overwrite
  partial=nocheck
  runlevel=nocheck
  idepend=nocheck
  rdepend=nocheck
  space=ask
  setuid=nocheck
  conflict=nocheck
  action=nocheck
  basedir=default
  DONT_ASK
 
  /usr/sbin/pkgadd -a ${ADMIN_FILE} -d ${MNT} -R ${BASE} SUNWxyz3 
  umount ${MNT}
  rmdir ${MNT}

1. Mounts a directory on a server that contains the package to install.

2. Creates a temporary package administration file, admin, to force the pkgadd(1M) command not to perform checks or prompt for questions when installing a package. Use the temporary package administration file to maintain a hands-off installation when you are adding packages.

3. Adds the package by using the -a option, specifying the package administration file, and the -R option, specifying the root path.

Note - In the past, the chroot(1M) command was used with the pkgadd and patchadd commands in the finish script environment. In rare instances, some packages or patches do not work with the -R option. You must create a dummy /etc/mnttab file in the /a root path before issuing the chroot command.

To create a dummy /etc/mnttab file, add the following line to your finish script:

cp /etc/mnttab /a/etc/mnttab

Customizing the Root Environment With a Finish Script

You can also use finish scripts to customize files that are already installed on a system. For example, the finish script in Example 24-3 customizes the root environment by appending information to the .cshrc file in the root (/) directory.

Example 24-3 Customizing the Root Environment With a Finish Script

#!/bin/sh
#
# Customize root's environment
#
echo "***adding customizations in /.cshrc"
test -f a/.cshrc || {
cat >> a/.cshrc <<EOF
set history=100 savehist=200 filec ignoreeof prompt="\$user@`uname -n`> "
alias cp cp -i
alias mv mv -i
alias rm rm -i
alias ls ls -FC
alias h history
alias c clear
unset autologout
EOF
}

Setting a System's Root Password With a Finish Script

After the Solaris software is installed on a system, the system reboots. Before the boot process is completed, the system prompts for the root password. Until someone types a password, the system cannot finish booting.

A finish script that is named set_root_pw is saved in the auto_install_sample directory. The finish script shows how to set the root password automatically, without prompting. set_root_pw is shown in Example 24-4.

Example 24-4 Setting the System's Root Password With a Finish Script

	 #!/bin/sh
	 #
	 #       @(#)set_root_pw 1.4 93/12/23 SMI
	 #
	 # This is an example Bourne shell script to be run after installation.
	 # It sets the system's root password to the entry defined in PASSWD.
	 # The encrypted password is obtained from an existing root password entry
	 # in /etc/shadow from an installed machine.
 
	 echo "setting password for root"
 
	 # set the root password
 PASSWD=dKO5IBkSF42lw
	 #create a temporary input file1
 cp /a/etc/shadow /a/etc/shadow.orig2
 
	 mv /a/etc/shadow /a/etc/shadow.orig
 	nawk -F: '{
         if ( $1 == "root" )3
           printf"%s:%s:%s:%s:%s:%s:%s:%s:%s\n",$1,passwd,$3,$4,$5,$6,$7,$8,$9
      else
		        printf"%s:%s:%s:%s:%s:%s:%s:%s:%s\n",$1,$2,$3,$4,$5,$6,$7,$8,$9
      }' passwd="$PASSWD" /a/etc/shadow.orig > /a/etc/shadow
 #remove the temporary file
 rm -f /a/etc/shadow.orig4
 # set the flag so sysidroot won't prompt for the root password
 sed -e 's/0 # root/1 # root/' ${SI_SYS_STATE} > /tmp/state.$$5
  mv /tmp/state.$$ ${SI_SYS_STATE}

1. Sets the variable PASSWD to an encrypted root password that is obtained from an existing entry in a system's /etc/shadow file.

2. Creates a temporary input file of /a/etc/shadow.

3. Changes the root entry in the /etc/shadow file for the newly installed system using $PASSWD as the password field.

4. Removes the temporary /a/etc/shadow file.

5. Changes the entry from 0 to a 1 in the state file so that the user is not prompted for the root password. The state file is accessed by using the variable SI_SYS_STATE, which has a value currently of /a/etc/.sysIDtool.state. To avoid problems with your scripts if this value changes, always reference this file by using $SI_SYS_STATE. The sed command that is shown here contains a tab character after the 0 and after the 1.

Note - If you set the system's root password with a finish script, users might attempt to discover the root password from the encrypted password in your finish script. Ensure that you safeguard against users who might try to determine the root password.