 |
|
E3000 / E4000 / E5000 / E6000 / E10000
E3500 / E4500 / E5500 / E6500
Option 2530
501-4178 |
1MB Cache Blackbird |
Notes
- The minimum operating system is Solaris 2.5.1.
- Solaris 2.5.1 Patch
103640-06 is recommended.
- Mixing module cache sizes within a system is supported.
E3000 - E6500 Notes
- OBP 3.2 Version 6 is required to support 250MHz 1MB modules.
- Clock Board 501-4286 is required to support 250MHz modules.
- Clock Board 501-4946 also supports 250MHz modules.
- Mixing module speeds within a system is not supported.
- Mixing module cache sizes on a single board requires OBP >=3.2.21.
- Ex500 systems were not shipped with 1MB 250MHz modules installed.
E10000 Notes
- A minimum of one processor per System Board is required.
- Mixing module speeds within a system is supported.
- Set the clock multiplier to 3:2 with the sys_clock (1m) ssp command.
E3000 / E4000 / E5000 / E6000 / E10000
E3500 / E4500 / E5500 / E6500
Option 2550
501-4249 |
4MB Cache Blackbird |
Notes
- The minimum operating system is Solaris 2.5.1.
- Mixing module cache sizes within a system is supported.
E3000 - E6500 Notes
- OBP 3.2 Version 7 is required to support 250MHz 4MB modules.
- Clock Board 501-4286 is required to support 250MHz modules.
- Clock Board 501-4946 also supports 250MHz modules.
- Mixing module speeds within a system is not supported.
- Mixing module cache sizes on a single board requires OBP >=3.2.21.
- CPU/Memory Board 501-2976 supports up to 2MB of cache per module.
- CPU/Memory Board 501-4312 supports up to 8MB of cache per module.
- CPU/Memory Board 501-4882 supports up to 8MB of cache per module.
E10000 Notes
- A minimum of one processor per System Board is required.
- Mixing module speeds within a system is supported.
- Set the clock multiplier to 3:2 with the sys_clock (1m) ssp command.
E3000 / E4000 / E5000 / E6000 / E10000
E3500 / E4500 / E5500 / E6500
Option 2550
501-4836 |
4MB Cache Blackbird |
Notes
- The minimum operating system is Solaris 2.5.1.
- Mixing module cache sizes within a system is supported.
E3000 - E6500 Notes
- OBP 3.2 Version 7 is required to support 250MHz 4MB modules.
- Clock Board 501-4286 is required to support 250MHz modules.
- Clock Board 501-4946 also supports 250MHz modules.
- Mixing module speeds within a system is not supported.
- Mixing module cache sizes on a single board requires OBP >=3.2.21.
- CPU/Memory Board 501-2976 supports up to 2MB of cache per module.
- CPU/Memory Board 501-4312 supports up to 8MB of cache per module.
- CPU/Memory Board 501-4882 supports up to 8MB of cache per module.
E10000 Notes
- A minimum of one processor per System Board is required.
- Mixing module speeds within a system is supported.
- Set the clock multiplier to 3:2 with the sys_clock (1m) ssp command.
|
|