Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Solaris 2.5.1 patches >=103640-06 are required.
3. OBP 3.2 Version 18 is required.
4. Mixing module cache sizes on a single board requires OBP >=3.2.21.
5. Mixing module speeds within a system is not supported.
6. The 8-slot Gigaplane operating at 100MHz with seven CPU/Memory boards and 400MHz modules does not support N+1 Power.

Compatibility Notes

1. Clock 501-2975 is not supported.
2. This module requires 100MHz CPU/Memory and I/O boards.
3. The E3x00 supports Clocks 501-4286, 501-4946, and 501-5365.
4. The E4x00 and E5x00 do not support Clock 501-4286.
5. The E4x00 and E5x00 support Clocks 501-4946 and 501-5365.
6. The E4000 and E5000 require a 100MHz Centerplane upgrade.
7. This module is not supported in the E6000 or E6500.

Reference

CPU Module Installation Guide, 806-0960.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Mixing module speeds within a system is supported.
3. A minimum of one processor per System Board is required.
4. Set the clock multiplier to 2:1 with the command:
   sys_clock -p two-to-one -s -i 100000000

   System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.

   System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 400MHz UltraSPARC module.

Reference:

System Board Installation and Configuration Guide, 805-7189.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Solaris 2.5.1 patches >=103640-06 are required.
3. OBP 3.2 Version 18 is required.
4. Mixing module cache sizes on a single board requires OBP >=3.2.21.
5. Mixing module speeds within a system is not supported.
6. The 8-slot Gigaplane operating at 100MHz with seven CPU/Memory boards and 400MHz modules does not support N+1 Power.

Compatibility Notes

1. Clock 501-2975 is not supported.
2. This module requires 100MHz CPU/Memory and I/O boards.
3. The E3x00 supports Clocks 501-4286, 501-4946, and 501-5365.
4. The E4x00 and E5x00 do not support Clock 501-4286.
5. The E4x00 and E5x00 support Clocks 501-4946 and 501-5365.
6. The E4000 and E5000 require a 100MHz Centerplane upgrade.
7. This module is not supported in the E6000 or E6500.

Reference

CPU Module Installation Guide, 806-0960.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Mixing module speeds within a system is supported.
3. A minimum of one processor per System Board is required.
4. Set the clock multiplier to 2:1 with the command:
   sys_clock -p two-to-one -s -i 100000000

   System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.

   System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 400MHz UltraSPARC module.

Reference:

System Board Installation and Configuration Guide, 805-7189.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Solaris 2.5.1 patches >=103640-06 are required.
3. OBP 3.2 Version 18 is required.
4. Mixing module cache sizes on a single board requires OBP >=3.2.21.
5. Mixing module speeds within a system is not supported.
6. The 8-slot Gigaplane operating at 100MHz with seven CPU/Memory boards and 400MHz modules does not support N+1 Power.

Compatibility Notes

1. Clock 501-2975 is not supported.
2. This module requires 100MHz CPU/Memory and I/O boards.
3. The E3x00 supports Clocks 501-4286, 501-4946, and 501-5365.
4. The E4x00 and E5x00 do not support Clock 501-4286.
5. The E4x00 and E5x00 support Clocks 501-4946 and 501-5365.
6. The E4000 and E5000 require a 100MHz Centerplane upgrade.
7. This module is not supported in the E6000 or E6500.

Reference

CPU Module Installation Guide, 806-0960.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Mixing module speeds within a system is supported.
3. A minimum of one processor per System Board is required.
4. Set the clock multiplier to 2:1 with the command:
   sys_clock -p two-to-one -s -i 100000000

   System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.

   System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 400MHz UltraSPARC module.

Reference:

System Board Installation and Configuration Guide, 805-7189.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Solaris 2.5.1 patch >=103640-27 and 2.6 patch >=105181-14 are required.
3. OBP 3.2 Version 21 is required. OBP 3.2 Version 24 is recommended.
4. Use the limit-ecache-size OBP command before installing Solaris 2.5.1 and before booting Solaris 2.5.1 without patch 103640-27.
5. Use the limit-ecache-size OBP command before installing Solaris 2.6 and before booting Solaris 2.6 without patch 105181-14.
6. Mixing module speeds within a system is not supported.
7. The 8-slot Gigaplane operating at 100MHz with seven CPU/Memory boards and 400MHz modules does not support N+1 Power.

Compatibility Notes

1. Clock 501-2975 is not supported.
2. The E6000 and E6500 require Clock 501-5365 for a 5:1 clock ratio.
3. The E3x00, E4x00, and E5x00 require Clock 501-5365 for a 5:1 clock ratio if 84MHz system boards are installed.
4. Clock 501-4286 or 501-4946 is supported in the E3x00, E4x00, and E5x00 if the centerplane and all system boards are 100MHz.
5. Clock 501-5365 is supported if 84MHz or 100MHz system boards are installed in the E3x00, E4x00, and E5x00.

Reference

CPU Module Installation Guide, 806-0960.

Notes

1. Mixing module speeds within a system is supported.
2. A minimum of one processor per System Board is required.
3. Set the clock multiplier to 2:1 with the command:
   sys_clock -p two-to-one -s -i 100000000

   System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.

   System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 400MHz UltraSPARC module.

Reference:

System Board Installation and Configuration Guide, 805-7189.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Solaris 2.5.1 patch >=103640-27 and 2.6 patch >=105181-14 are required.
3. OBP 3.2 Version 21 is required. OBP 3.2 Version 24 is recommended.
4. Use the limit-ecache-size OBP command before installing Solaris 2.5.1 and before booting Solaris 2.5.1 without patch 103640-27.
5. Use the limit-ecache-size OBP command before installing Solaris 2.6 and before booting Solaris 2.6 without patch 105181-14.
6. Mixing module speeds within a system is not supported.
7. The 8-slot Gigaplane operating at 100MHz with seven CPU/Memory boards and 400MHz modules does not support N+1 Power.

Compatibility Notes

1. Clock 501-2975 is not supported.
2. The E6000 and E6500 require Clock 501-5365 for a 5:1 clock ratio.
3. The E3x00, E4x00, and E5x00 require Clock 501-5365 for a 5:1 clock ratio if 84MHz system boards are installed.
4. Clock 501-4286 or 501-4946 is supported in the E3x00, E4x00, and E5x00 if the centerplane and all system boards are 100MHz.
5. Clock 501-5365 is supported if 84MHz or 100MHz system boards are installed in the E3x00, E4x00, and E5x00.

Reference

CPU Module Installation Guide, 806-0960.

Notes

1. Mixing module speeds within a system is supported.
2. A minimum of one processor per System Board is required.
3. Set the clock multiplier to 2:1 with the command:
   sys_clock -p two-to-one -s -i 100000000

   System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.

   System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 400MHz UltraSPARC module.

Reference:

System Board Installation and Configuration Guide, 805-7189.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Solaris 2.5.1 patch >=103640-27 and 2.6 patch >=105181-14 are required.
3. OBP 3.2 Version 21 is required. OBP 3.2 Version 24 is recommended.
4. Use the limit-ecache-size OBP command before installing Solaris 2.5.1 and before booting Solaris 2.5.1 without patch 103640-27.
5. Use the limit-ecache-size OBP command before installing Solaris 2.6 and before booting Solaris 2.6 without patch 105181-14.
6. Mixing module speeds within a system is not supported.
7. The 8-slot Gigaplane operating at 100MHz with seven CPU/Memory boards and 400MHz modules does not support N+1 Power.
8. For more information on 501-5762, see ECO WO_16898.

Compatibility Notes

1. Clock 501-2975 is not supported.
2. The E6000 and E6500 require Clock 501-5365 for a 5:1 clock ratio.
3. The E3x00, E4x00, and E5x00 require Clock 501-5365 for a 5:1 clock ratio if 84MHz system boards are installed.
4. Clock 501-4286 or 501-4946 is supported in the E3x00, E4x00, and E5x00 if the centerplane and all system boards are 100MHz.
5. Clock 501-5365 is supported if 84MHz or 100MHz system boards are installed in the E3x00, E4x00, and E5x00.

Reference

CPU Module Installation Guide, 806-0960.

Notes

1. Mixing module speeds within a system is supported.
2. A minimum of one processor per System Board is required.
3. Set the clock multiplier to 2:1 with the command:
   sys_clock -p two-to-one -s -i 100000000

   System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.

   System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 400MHz UltraSPARC module.

   For more information on 501-5762, see ECO WO_16898.

Reference:

System Board Installation and Configuration Guide, 805-7189.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Solaris 2.5.1 patch >=103640-27 and 2.6 patch >=105181-14 are required.
3. OBP 3.2 Version 21 is required. OBP 3.2 Version 24 is recommended.
4. Use the limit-ecache-size OBP command before installing Solaris 2.5.1 and before booting Solaris 2.5.1 without patch 103640-27.
5. Use the limit-ecache-size OBP command before installing Solaris 2.6 and before booting Solaris 2.6 without patch 105181-14.
6. Mixing module speeds within a system is not supported.
7. The 8-slot Gigaplane operating at 100MHz with seven CPU/Memory boards and 400MHz modules does not support N+1 Power.

Compatibility Notes

1. Clock 501-2975 is not supported.
2. The E6000 and E6500 require Clock 501-5365 for a 5:1 clock ratio.
3. The E3x00, E4x00, and E5x00 require Clock 501-5365 for a 5:1 clock ratio if 84MHz system boards are installed.
4. Clock 501-4286 or 501-4946 is supported in the E3x00, E4x00, and E5x00 if the centerplane and all system boards are 100MHz.
5. Clock 501-5365 is supported if 84MHz or 100MHz system boards are installed in the E3x00, E4x00, and E5x00.

Reference

CPU Module Installation Guide, 806-0960.

Notes

1. The minimum SSP release is 3.3.
2. Patch >=108885-09 (SSP 3.3) or >=110304-05 (SSP 3.4) is required.
   (No patching is required for SSP 3.5.)
3. Mixing module speeds within a system is supported.
4. A minimum of one processor per System Board is required.
5. Set the clock multiplier to 2:1 with the command:
   sys_clock -p two-to-one -s -i 100000000

   System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.

   System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 400MHz UltraSPARC module.

Reference:

System Board Installation and Configuration Guide, 805-7189.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Solaris 2.5.1 patch >=103640-27 and 2.6 patch >=105181-14 are require d.
3. OBP 3.2 Version 21 is required. OBP 3.2 Version 29 is recommended.
4. Use the limit-ecache-size OBP command before installing Solaris 2.5.1 and before booting Solaris 2.5.1 without patch 103640-27.
5. Use the limit-ecache-size OBP command before installing Solaris 2.6 and before booting Solaris 2.6 without patch 105181-14.
6. Mixing module speeds within a system is not supported.
7. The 8-slot Gigaplane operating at 100MHz with seven CPU/Memory boards and 400MHz modules does not support N+1 Power.

Compatibility Notes

1. Clock 501-2975 is not supported.
2. The E6000 and E6500 require Clock 501-5365 for a 5:1 clock ratio.
3. The E3x00, E4x00, and E5x00 require Clock 501-5365 for a 5:1 clock ratio if 84MHz system boards are installed.
4. Clock 501-4286 or 501-4946 is supported in the E3x00, E4x00, and E5x00 if the centerplane and all system boards are 100MHz.
5. Clock 501-5365 is supported if 84MHz or 100MHz system boards are installed in the E3x00, E4x00, and E5x00.

Reference

CPU Module Installation Guide, 806-0960.

Notes

1. The minimum SSP release is 3.3.
2. Patch >=108885-09 (SSP 3.3) or >=110304-05 (SSP 3.4) is required.
   (No patching is required for SSP 3.5.)
3. Mixing module speeds within a system is supported.
4. A minimum of one processor per System Board is required.
5. Set the clock multiplier to 2:1 with the command:
   sys_clock -p two-to-one -s -i 100000000

   System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.

   System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 400MHz UltraSPARC module.

Reference:

System Board Installation and Configuration Guide, 805-7189.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Solaris 2.5.1 patch >=103640-27 and 2.6 patch >=105181-14 are require d.
3. OBP 3.2 Version 21 is required. OBP 3.2 Version 29 is recommended.
4. Use the limit-ecache-size OBP command before installing Solaris 2.5.1 and before booting Solaris 2.5.1 without patch 103640-27.
5. Use the limit-ecache-size OBP command before installing Solaris 2.6 and before booting Solaris 2.6 without patch 105181-14.
6. Mixing module speeds within a system is not supported.
7. The 8-slot Gigaplane operating at 100MHz with seven CPU/Memory boards and 400MHz modules does not support N+1 Power.

Compatibility Notes

1. Clock 501-2975 is not supported.
2. The E6000 and E6500 require Clock 501-5365 for a 5:1 clock ratio.
3. The E3x00, E4x00, and E5x00 require Clock 501-5365 for a 5:1 clock ratio if 84MHz system boards are installed.
4. Clock 501-4286 or 501-4946 is supported in the E3x00, E4x00, and E5x00 if the centerplane and all system boards are 100MHz.
5. Clock 501-5365 is supported if 84MHz or 100MHz system boards are installed in the E3x00, E4x00, and E5x00.

Reference

CPU Module Installation Guide, 806-0960.

Notes

1. The minimum SSP release is 3.3.
2. Patch >=108885-09 (SSP 3.3) or >=110304-05 (SSP 3.4) is required.
   (No patching is required for SSP 3.5.)
3. Mixing module speeds within a system is supported.
4. A minimum of one processor per System Board is required.
5. Set the clock multiplier to 2:1 with the command:
   sys_clock -p two-to-one -s -i 100000000

   System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.

   System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 400MHz UltraSPARC module.

Reference:

System Board Installation and Configuration Guide, 805-7189.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Solaris 2.5.1 patch >=103640-27 and 2.6 patch >=105181-14 are required.
3. OBP 3.2 Version 21 is required. OBP 3.2 Version 29 is recommended.
4. Use the limit-ecache-size OBP command before installing Solaris 2.5.1 and before booting Solaris 2.5.1 without patch 103640-27.
5. Use the limit-ecache-size OBP command before installing Solaris 2.6 and before booting Solaris 2.6 without patch 105181-14.
6. Mixing module speeds within a system is not supported.
7. The 8-slot Gigaplane operating at 100MHz with seven CPU/Memory boards and 400MHz modules does not support N+1 Power.

Compatibility Notes

1. Clock 501-2975 is not supported.
2. The E6000 and E6500 require Clock 501-5365 for a 5:1 clock ratio.
3. The E3x00, E4x00, and E5x00 require Clock 501-5365 for a 5:1 clock ratio if 84MHz system boards are installed.
4. Clock 501-4286 or 501-4946 is supported in the E3x00, E4x00, and E5x00 if the centerplane and all system boards are 100MHz.
5. Clock 501-5365 is supported if 84MHz or 100MHz system boards are installed in the E3x00, E4x00, and E5x00.

Reference

CPU Module Installation Guide, 806-0960.

Notes

1. The minimum SSP release is 3.3.
2. Patch >=108885-09 (SSP 3.3) or >=110304-05 (SSP 3.4) is required.
   (No patching is required for SSP 3.5.)
3. Mixing module speeds within a system is supported.
4. A minimum of one processor per System Board is required.
5. Set the clock multiplier to 2:1 with the command:
   sys_clock -p two-to-one -s -i 100000000

   System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.

   System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 400MHz UltraSPARC module.

Reference:

System Board Installation and Configuration Guide, 805-7189.

Notes

1. The minimum operating system is 2.5.1 HW: 11/97 or 2.6 HW: 3/98.
2. Solaris 2.5.1 patch >=103640-27 and 2.6 patch >=105181-14 are required.
3. OBP 3.2 Version 21 is required. OBP 3.2 Version 29 is recommended.
4. Use the limit-ecache-size OBP command before installing Solaris 2.5.1 and before booting Solaris 2.5.1 without patch 103640-27.
5. Use the limit-ecache-size OBP command before installing Solaris 2.6 and before booting Solaris 2.6 without patch 105181-14.
6. Mixing module speeds within a system is not supported.
7. The 8-slot Gigaplane operating at 100MHz with seven CPU/Memory boards and 400MHz modules does not support N+1 Power.

Compatibility Notes

1. Clock 501-2975 is not supported.
2. The E6000 and E6500 require Clock 501-5365 for a 5:1 clock ratio.
3. The E3x00, E4x00, and E5x00 require Clock 501-5365 for a 5:1 clock ratio if 84MHz system boards are installed.
4. Clock 501-4286 or 501-4946 is supported in the E3x00, E4x00, and E5x00 if the centerplane and all system boards are 100MHz.
5. Clock 501-5365 is supported if 84MHz or 100MHz system boards are installed in the E3x00, E4x00, and E5x00.

Reference

CPU Module Installation Guide, 806-0960.

Notes

1. The minimum SSP release is 3.3.
2. Patch >=108885-09 (SSP 3.3) or >=110304-05 (SSP 3.4) is required.
   (No patching is required for SSP 3.5.)
3. Mixing module speeds within a system is supported.
4. A minimum of one processor per System Board is required.
5. Set the clock multiplier to 2:1 with the command:
   sys_clock -p two-to-one -s -i 100000000

   System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.

   System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 400MHz UltraSPARC module.

Reference:

System Board Installation and Configuration Guide, 805-7189.