 |
|
Sun Quad FastEthernet 2.0 (SQFE/S)
SS5 / SS10 / SS20 / SS600 / SS1000 / SC2000
A11 / A12 / A14
E3000 / E4000 / E5000 / E6000
E3500 / E4500 / E5500 / E6500 / E10000
Option 1049
Notes
- The SS1000 and SC2000 require OBP 2.26.
- The E10000 is not compatible with 501-4837-01. Use >=501-4837-02.
- One CPU per port is recommended for maximum throughput.
- Two CPUs per QFE/S is recommended for >=200MHz systems.
- Set the NVRAM variable local-mac-address? to true to enable the MAC
addresses of the network interfaces on the Quad FastEthernet board.
Operating System Notes
- The minimum OS is Solaris 2.4 and Quad FastEthernet 2.0.
- Solaris 2.6 requires QFE 2.1 software.
- Do NOT use QFE 2.1 software with Solaris 2.6 Hardware: 5/98.
- QFE 2.2 software is bundled in 2.6 HW: 5/98 and SunTrunking 1.0.1.
- QFE/S 2.0 uses the SUNWqfed drivers and supports Sun Trunking.
- The output of pkginfo -x does not match the QFE release number.
Conversion tables are included in
Release Notes 805-3893.
Reference
Sun Quad FastEthernet Installation Guide, 805-3114.
|
|