SPARCprinter EC Ethernet Card

Notes

1. The Imaging Processor board contains a NVRAM card.
2. An authorization code is required for TCP/IP network protocol.
3. The authorization code is linked to the Ethernet address.
4. The NVRAM card contains the authorization code.
5. Two PROMs on the Ethernet card contain the Ethernet address.
6. When the Ethernet card is replaced, move the PROMs from the old card to the new card to retain the Ethernet address.
7. When the Imaging Processor board is replaced, move the NVRAM card from the old board to the new board to retain the authorization code.
8. The authorization code is invalid if the NVRAM card is replaced.