rancid & Procurve 2524

['john heasley']

thanks.  i'll add this bug to the todo list.  hlogin should be able to
login to the switch and/or enable when the switch does not require a
password.  in the mean time, you have a workaround.

Wed, Apr 10, 2002 at 03:40:33PM +0200, Juan José Muñoz Martinez:
> Hello, sorry for the delay.
> 
> the teo commands are typed in CLI mode through telnet or console, but you
> can set the password for operator and administrator through menu options
> through (first typing 'menu' command).
> 
> the configuration loks like a cisco device, if you are in menu mode you must
> go to CLI mode, if you enter with telnet and the prompt is '>' you must type
> enable and enter password if defined to get privileged prompt '#'.
> Then to start configuration you must enter comand 'config terminal', now you
> get the configuration prompt (config)# and can enter configuration commands.
> 
>  password operator<CR>
>  
> Here is the sequence of commands and inputs:
> 
> HP ProCurve Switch 2524> en
> HP ProCurve Switch 2524# alhambra.
> Invalid input: alhambra.
> HP ProCurve Switch 2524# pass
> Invalid input: pass
> HP ProCurve Switch 2524# conf term
> HP ProCurve Switch 2524(config)# password operator
> New password: ********
> Please retype new password: *********
> Retyped password differs from initially typed password.
> HP ProCurve Switch 2524(config)# password manager
> New password: *********
> Please retype new password: *********
> HP ProCurve Switch 2524(config)# exit
> HP ProCurve Switch 2524# write mem
> HP ProCurve Switch 2524# exit
> HP ProCurve Switch 2524> exit
> Do you want to log out (Y/N)?Y
> 
> 
> For polling of the switch with rancid add the followin lines to .cloginrc
> and router.db:
> 
> .cloginrc
> =============
> ...
> add password 192.168.1.78 login-pass enable-pass
> ...
> 
> router.db
> =============
> ...
> 192.168.1.78:hp:up
> ...
> 
> I expect to learn more about procurve switches command line, I provide you
> more information as I get it.
> 
> Best Regards.
> 
> > -----Mensaje original-----
> > De: john heasley [mailto:heas at shrubbery.net]
> > Enviado el: viernes, 05 de abril de 2002 20:17
> > Para: Juan José Muñoz Martinez
> > CC: rancid-discuss at shrubbery.net
> > Asunto: Re: rancid & Procurve 2524
> > 
> > 
> > Fri, Apr 05, 2002 at 01:53:07PM +0200, Juan José Muñoz Martinez:
> > > I've got it.
> > > 
> > > I've configured login password with "password operator" 
> > command and enable
> > > password with "password manager", and then with the line 
> > "add password
> > 
> > are those part of the configuration?  what is their 
> > significance (so, i
> > may make a note in the FAQ/manpage)?
> > 
> >