[rancid] Cisco SG-500 configs?

[Alexander Bochmann]

Hi,


...on Thu, Jun 05, 2014 at 01:58:18PM +0100, Alex DEKKER wrote:

 > >does anyone have rancid 2.3.x patches for Cisco SG-500 switches with current
 > >software? I've found several pieces of code that claim to support the SG series,
 > Have you tried this?:
 > https://github.com/chrpinedo/rancid-cisco-sb

Yes, and several variants of that one.

 > Ahhh hang on, when you say current software, are you talking about
 > newer switch firmwares?

Exactly. For example, csbrancid wants to use an "lcli" command upon logging 
in that the current SG switches don't know about anymore - they expect an 
"enable"...

 > sg5>enable
 > Password:************
 > sg5#sh ver
 > 
 >        Unit             SW version         Boot version         HW version
 > ------------------- ------------------- ------------------- -------------------
 >          1               1.3.7.18            1.3.7.01               V02
 >
 > sg5#sh system
 > 
 > Unit          Type
 > ---- ----------------------
 >  1          SG500-28
 >[..]

Alex.