[rancid] Modifying Cisco Login Banner

[Chip Pleasants]

That seems work!  Thank you very much.

-Chip


On Mon, Jan 26, 2015 at 2:46 PM, heasley <heas at shrubbery.net> wrote:

> Mon, Jan 26, 2015 at 01:57:55PM -0500, Chip Pleasants:
> > Hi all,
> >
> > I realize this topic has beat up, but I'm hoping someone can point me in
> > the right direction.  I'm trying to change my current cisco login banner,
> > which doesn't have > or # in it. The new login banner doesn't either. It
> > appears rancid is getting hung up on the router output "Enter TEXT
> > message.  End with the character 'X' and end up timing out. I found a
> > couple old threads, but not any specific solutions to this issue.  Bellow
> > is the configuration I'm adding/modifying, and I've attached the debug
> > output. Let me know if you any questions and thanks in advance for any
> > assistance.
> >
> > -Chip
> >
> >
> >
> > !
>   dont need this line or the other ! lines
>
> > conf t
> > !
> > no banner login X
>   ^^^^^^^^^^^^^^^^^^ dont think you need this either
> > banner login X
> you dont get a prompt after this.
>
> > Rev 3(1-17)
> > ___________
> > X
> > !
> > end
> > !
> > wr
>
>
> so file becomes (with the $ to indicate EOL):
> conf t
> banner login X\nRev 3(1-17)\n___________\nX$
> end
> wr
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20150126/d3741a69/attachment.html>