[rancid] Cisco commands in 3.6.2

[Piegorsch, Weylin William]

Does this help?  I just ran this on an ASA I currently have in Rancid (v3.4).
weylin

ASA5545-X-version9.4(4)5/pri/act# sh inventory ?

  <0-3>  Inventory slot number
  |      Output modifiers
  <cr>
ASA5545-X-version9.4(4)5/pri/act# sh inventory

-----Original Message-----
From: heasley <heas at shrubbery.net>
Date: Wednesday, June 28, 2017 at 13:32
To: Craig Hopkins <c.o.hopkins at gmail.com>
Cc: <rancid-discuss at shrubbery.net>
Subject: Re: [rancid] Cisco commands in 3.6.2

    Wed, Jun 28, 2017 at 10:10:23AM +0100, Craig Hopkins:
    > Hi,
    > 
    > rancid is happily backing up my ASAs and switches, but in rancid.types.base
    > I can see
    > 
    > cisco;command;ios::ShowInventory;show inventory raw
    > 
    > How do I get rancid to run this command on a Cisco? It isn't currently. It
    > looks like it's just doing show version, show flash and show running.
    
    it is run; but if the command is not supported by the device or is different
    on the ASA (because cisco is incapable of consistency between platforms) and
    therefore is "ambiguous", that failure will be ignored by rancid.  if you
    know what the correct command is for the ASA, lmk.