|
Part Number
|
Format
|
Title |
Description |
|
n/a
|
|
Genie Lift Ordering Process & Locations |
Provides the process for ordering a Genie Lift for use in rack
mounting some Sun Fire servers and the locations where they are stored. |
|
n/a
|
PDF
|
Sun Fire 3800-6800 Servers: Just the Facts (11/02) |
Provides reference information about positioning, target market,
system architecture, and ordering. |
|
n/a
|
PDF
|
SunFire MidrangeServer Capacity-On-Demand Version 2.0 Administration Guide |
This document will show how to do the following:
- Configure the platform for capacity-on-demand (COD 2.0) software
- Identify COD Systems
- Identify COD Part Number and License Requirements
- Manage COD right-to-use (RTU) Licenses
- Identify COD SC-Apps Commands
- Install and Remove a COD RTU License Key
- Enable COD Resources
- Monitor COD Resources
|
|
n/a
|
 PDF
|
Sun Fire Midframe Server Best Practices for Administration
(10/01) |
This article covers the following topics:
- Configuring the System Controller (SC)
- SC administration philosophy for the Sun Fire Midframe server
- Midframe Service Processor (MSP) configuration
- Basic platform security
- Error analysis and diagnosis
|
| |
|
805-7362
|
PDF
|
Sun Fire 6800/4810/4800/3800 Systems Overview Manual |
This document provides the following information about the
Sun Fire system family of servers. |
|
805-7363
|
PDF
|
Sun Fire 6800/4810/4800/3800 Systems Service Manual |
This book describes how to remove and install field-replaceable
units (FRUs) that are part of the system. |
|
805-7364
|
|
Sun Fire 6800/4810/4800/3800 Systems Troubleshooting Manual |
This document contains troubleshooting information pertaining to Sun Fire
6800/4810/4800/3800 systems. |
|
805-7365
|
PDF
|
Sun Fire 6800/4810/4800/3800 Systems Site Planning Guide |
The Sun Fire 6800/4810/4800/3800 Systems Site Planning Guide helps management
and site preparation personnel identify and create suitable environments
for the Sun Fire cabinet mounted systems and standalone systems. |
|
805-7369
|
PDF
|
Sun Fire 4810/4800/3800 Systems Getting Started |
A breakdown of the Sun Fire 4810/4800/3800 documentation to help define
what document is needed during the installation process. |
|
805-7370
|
PDF
|
Sun Fire 4810/4800/3800 Systems Installation Guide |
The Sun Fire 4810/4800/3800 Installation Guide provides installation instructions
for standalone Sun Fire 4810, Sun Fire 4800, and Sun Fire 3800 systems. |
|
805-7372
|
PDF
|
Sun Fire 6800/4810/4800/3800 System Controller Command Reference
Manual (5.12.5) |
This book describes how to use the system controller command
line interface, which controls the system functions and provides environmental
monitoring plus domain and hardware control. |
|
805-7373
|
PDF
|
Sun Fire 6800/4810/4800/3800 Systems Platform Administration Manual (5.12.5) |
This book presents a step-by-step description of how to power on the system,
customize the platform setup, and how to set up and manage domains. |
| |
|
806-2942
|
PDF
|
Sun Fire Cabinet Installation and Reference Manual |
The Sun Fire Cabinet Installation and Reference Manual provides installation
instructions and reference information for the Sun Fire cabinet. |
|
806-2946
|
PDF
|
Sun Fire 6800/4810/4800/3800 Systems CPU/Memory Board Installation
Guide |
Location and installation/removal of the CPU/Memory boards. |
|
806-2948
|
PDF
|
Sun Fire 6800/4810/4800/3800 System Controller Board Installation Guide |
Location and installation/removal of the System Controller boards. |
|
806-2951
|
PDF
|
Sun Fire 3800 System CompactPCI I/O Assembly Installation Guide |
Location and installation/removal of the CompactPCI I/ O Assembly. |
|
806-2956
|
PDF
|
Sun Fire 6800/4810/4800/3800 Systems Powering the System Off and On
Guide |
Procedure for powering on/off a Sun Fire 6800/4810/4800/3800 system. |
|
806-3281
|
PDF
|
Sun Fire 6800/4810/4800/3800 Systems Memory Module (DIMM)
Installation Guide |
Installation and removal of the Memory Module (DIMM) on the
CPU/Memory board. |
|
806-4713
|
PDF
|
Sun Fire 3800 System Fan Tray Installation Guide |
Installation and removal of the System Fan Tray in a Powered On/Off system. |
|
806-4717
|
PDF
|
Sun Fire Cabinet Redundant Transfer Unit (RTU) Installation
Guide |
Installation and removal of the Redundant Transfer Unit
(RTU). |
|
806-4719
|
PDF
|
Sun Fire 3800 System Power Supply Installation Guide |
Installation and removal of the System Power Supply in a Powered On/Off
system. |
|
806-6073
|
|
Thermal Guidelines for Mounting Sun Fire 4810/4800/3800 Systems in
a Non-Sun Cabinet |
These guidelines are intended to assist those who would install the Sun
Fire 4810/ 4800/3800 systems at the end users site. These guidelines address
cooling issues only. |
|
806-6781
|
PDF
|
Sun Fire 4810/4800/3800 Systems Cabinet Mounting Guide |
The Sun Fire 4810/4800/3800 Systems Cabinet Mounting Guide provides installation
instructions for mounting the Sun Fire 4810, Sun Fire 4800, and Sun Fire
3800 systems into a Sun Fire cabinet. This instructions are not for mounting
these systems in industry standard 19-inch racks. |
|
806-6783
|
|
Sun Fire 6800, 4810, 4800, and 3800 Systems Dynamic Reconfiguration User
Guide |
Describes the Dynamic Reconfiguration (DR) feature, which enables you
to attach and detach system boards from a running system. There are some
requirements for DR for the Sun Fire 3800-6800, please see infodoc
43382
for more details.
|
|
806-6806
|
PDF
|
Sun Fire 6800/4810/4800/3800 Systems Capacity on Demand Administration Manual |
Provides an overview of the Capacity on Demand (COD) software for the Sun Fire 6800/4810/4800/3800 systems. It describes how to install, remove, and monitor CPU processor licenses. |
|
806-7042
|
PDF
|
Sun Fire Cabinet Extension Brackets Installation Guide |
Installation of the Sun Fire Extension Brackets. |
|
806-7217
|
PDF
|
Sun Fire 6800/4810/4800/3800 Systems Product Notes |
These Product Notes contain important information and late-breaking news
for Sun Fire 6800/4810/4800/3800 systems. |
|
806-7746
|
|
Sun Fire Cabinet Unpacking Guide |
Provides instruction on how to unpack a new Sun Fire cabinet from its
crate. |
| |
|
816-0557
|
|
Sun Fire Cabinet Front Panel Installation Guide |
Provides instruction on how to install front panels on a Sun Fire Cabinet. |
|
816-2062
|
|
Sun Fire 6800 System and Sun Fire Cabinet Rackmount Placement Matrix |
Describes where to install Sun StorEdge products, Sun Fire 3800, 4800,
and 4810 systems into the Sun Fire cabinet. |
|
816-2552
|
|
Sun Fire 6800/4810/4800/3800 Systems Documentation Notes |
Provides information that some documentation in the Sun Fire system binders
need to be updated. |
|
816-2553
|
|
Sun Fire 6800/4810/4800/3800 Systems Software Release Notes (5.12.5) |
This document contains information and late-breaking news for software
on Sun Fire 6800/4810/4800/3800 systems. This document contains the following
sections:
- General Information
- Supported Veritas Products
- Firmware On Replacement Boards and Assemblies
- Firmware Upgrade Changes
- Log Message Changes
- System Controller Command Changes
- Modified Command Options
- New Commands
- New Command Options/Parameters
- Removed Commands
- Removed Command Options
- Known Sun Fire 6800/4810/4800/3800 System Limitations
|
|
816-2703
|
|
Sun Management Center 3.0 Supplement for Sun Fire 6800, 4810, 4800,
and 3800 Systems |
Describes the use of Sun Management Center 3.0 software on Sun Fire 6800,
4810, 4800, and 3800 systems. |
|
816-2970
|
|
Sun Fire 6800/4810/4800/3800 Systems Platform Administration Manual (5.13.0) |
Provides an overview of the system and presents a step-by-step description
of common administration procedures. It explains how to configure and manage
the platform and domains. It also explains how to remove and replace components
and perform firmware upgrades. It contains information about security, troubleshooting,
and a glossary of technical terms. |
|
816-2971
|
|
Sun Fire 6800/4810/4800/3800 System Controller Command Reference Manual (5.13.0) |
Describes the Sun Fire 6800/4810/4800/3800 system controller command line
interface. The system controller is responsible for controlling system functions,
environmental monitoring, domain control, and hardware control of the server.
Using the command line interface, you can configure the platform and domains,
power on and off domains, power supplies, fans, and other components. Access
to the Solaris[tm] domain console is also possible using the command line
interface. |
|
816-2972
|
|
Sun Fire 3800-6800 System Firmware 5.13.0 Release Notes |
Provides information on new and revised features, as well as late-breaking
news, for firmware release 5.13.0 on Sun Fire 3800, 4800, 4810, and 6800
servers. You will find the following:
- New Features
- System Controller Command Changes
- New Commands
- Modified Commands
- General Information
- Known Sun Fire 6800/4810/4800/3800 System Limitations
|
|
816-3798
|
|
Sun Fire 6800/4810/4800/3800 Systems 900 MHz (Cu) UltraSPARC III CPU/Memory
Board Upgrade |
Provides information on requirements when upgrading Sun Fire 6800/4810/4800/3800
CPU/Memory boards from 750MHz versions to 900MHz versions. |
|
816-3885
|
|
Sun Fire 6800/4810/4800/3800 Systems Software Release Notes |
Contains information and late-breaking news for software on Sun Fire 6800/4810/4800/3800
systems, such as Dynamic Reconfiguration (DR) and System Controller commands. |
|
816-4560
|
|
Sun Fire 3800-6800 Servers Dynamic Reconfiguration - Sun BluePrints[tm]
Online April 2002 |
Dynamic Reconfiguration (DR) is a key component of the Solaris Operating
Environment (Solaris OE). By using DR, hardware components can be added
or removed from a system with minimal interruption. DR increases the overall
uptime and availability of systems. While using DR for system upgrades,
modifications, or service actions, the Solaris OE and user applications
remain operating. This document contains the following sections about DR:
- A general overview of DR
- DR implementation on Sun Fire 3800 6800 servers
- Best-practice guidelines for DR and command line procedures
|
|
816-4851
|
|
Sun Fire 6800/4810/4800/3800 Systems Platform Administration Manual (5.14.0)
|
Provides an overview of the system and presents a step-by-step description of common administration procedures. It explains how to configure and manage the platform and domains. It also explains how to remove and replace components and perform firmware upgrades. It contains information about security, troubleshooting, and a glossary of technical terms. |
|
816-4852
|
|
Sun Fire 6800/4810/4800/3800 System Controller Command Reference Manual (5.14.0) |
Describes the Sun FireTM 6800/4810/4800/3800 system controller command line interface. The system controller is responsible for controlling system functions, environmental monitoring, domain control, and hardware control of the server. Using the command line interface, you can configure the platform and domains, power on and off domains, power supplies, fans, and other components. Access to the Solaris domain console is also possible using the command line interface. |
|
816-4853
|
|
Sun Fire 6800/4810/4800/3800 Systems Firmware 5.14.0 Release Notes |
Provides information on new and revised features, as well as late-breaking news,
for firmware release 5.14.0 on Sun Fire 6800/4810/4800/3800 systems. |
|
816-5053
|
|
Soft Memory Errors and Their Effect on Sun Fire Systems |
Intends to explain the behavior of Sun Fire systems in the presence of
soft memory errors. It discusses what soft memory errors are and why they
happen, the behavior of the Solaris[tm] Operating Environment, and when
memory should be serviced in the presence of soft memory errors. |
|
816-5402
|
|
Supplement to Sun Fire 6800/4810/4800/3800 Systems Troubleshooting Manual Error Examples and Analysis |
This document is intended as a supplement to the existing Sun Fire 6800/4810/4800/3800 Troubleshooting Manual and will focus on error examples. As there are existing ITT classes covering architecture, only detail helpful in understanding errors will be reviewed. Please refer to the references listed herein for more detailed architectural information. |
|
816-6062
|
|
Enabling Capacity on Demand (COD) CPU/Memory Boards on Sun Fire 15K/12K/6800/4810/4800/3800 Systems |
Describes how the enablecodboard system controller command converts a non-COD CPU/Memory board (Uniboard) to a COD CPU/Memory board. This command is for the Sun Fire midrange and high-end systems and is for Sun internal use only. |
|
816-6066
|
|
Capacity on Demand Right-to-Use License for the Sun Fire" 15K/12K/6800/4810/4800/3800 Systems |
COD License Certificate for placement and safekeeping of one's COD license key |
|
816-7365
|
|
Sun Fire 6800/4810/4800/3800 Systems Firmware 5.13.2 Release Notes |
Provides information on new and revised features, as well as late-breaking
news, for firmware release 5.13.2 on Sun Fire 6800/4810/4800/3800 servers.
If you are updating from a version of firmware other than 5.13.0, please
see the Sun Fire 3800-6800 System Firmware 5.13.0 Release Notes for the
list of features added in that release, as well as the information contained
here. |
|
816-7909
|
|
Sun Fire 6800/4810/4800/3800 Systems Firmware 5.13.3 Release Notes |
provides information on new and revised features, as well as latebreaking news, for firmware release 5.13.3 on Sun Fire" 6800/4810/4800/3800 servers. If you are updating from a version of firmware other than 5.13.0, please see the Sun Fire 6800/4810/4800/3800 Systems Firmware 5.13.0 Release Notes for the list of features added in that release, as well as the information contained here. |
| |
|
817-0080
|
|
Sun Fire[tm] Midframe Server Best Practices Update for Firmware 5.13.x |
Introduces new best practices based on the enhancements that have been made to the SC in firmware update 5.13.x. |
|
817-0957
|
|
Sun Fire 6800/4810/4800/3800 Systems Firmware 5.13.4 Release Notes |
Provides information on new and revised features, as well as latebreaking news, for firmware release 5.13.4 on Sun Fire 6800/4810/4800/3800 systems. If you are updating from a version of firmware other than 5.13.0, please see the Sun Fire 6800/4810/4800/3800 Systems Firmware 5.13.0 Release Notes for the list of features added in that release, as well as the information contained here. |
|
817-1305
|
|
Sun Fire 6800/4810/4800/3800 Systems Firmware 5.14.2 Release Notes |
Provides information on new and revised features, as well as latebreaking news, for firmware release 5.14.0 and patch release 5.14.2 on Sun Fire" 6800/4810/4800/3800 systems (Sun did not release a 5.14.1 patch). These Release Notes contain the same information as the 5.14.0 Release Notes, plus information about 5.14.2 added and clearly marked. |
