FCAL Base Backplane with Dual Loop (A and B)
Note: When LoopB is configured, the external Port 1
of X6727A (375-3030) card cannot be used for additional external storage.
This would extend the internal loop B outside of the box, which is not supported.
Making use of the second external port off X6727A is supported.
NOTE: Right
click and select "View Image" to get just the image for printing and saving.
|
Cable
|
Connection Points
|
Base Power Cable
Part # 530-2841
|
Origin: P15
to PDB-J8
Destination: P16
to Base Backplane-J0100 |
I2C Segment 5 Cable (Part 1)
Part #530-2840
|
Origin: P18
to I/O Board-J3805
Destination: P19
to Base Backplane-J0800 |
FCAL (Motherboard to Base Backplane)
Loop A Cable
Part #530-2623
|
Origin: On
Motherboard - A to FCAL(IN), B to FCAL(OUT)
Destination: On
Base Backplane - A to J0201, B to J0200 |
FCAL (X6727A (375-3030) Card to Base Backplane)
Loop B Cable
Part #530-3056
|
Origin: On
X6727A (375-3030) Card - P3 to J3(TX); P4 to J4(RX)
Destination:
On
Base Backplane - C to J01100, D to J01101 |
|