| |
| | tail - deliver the last part of a file |
SYNOPSIS
| | /usr/bin/tail [ +- number [lbcr] ] [file] |
| | /usr/bin/tail [-lbcr] [file] |
| | /usr/bin/tail [ +- number [lbcf] ] [file] |
| | /usr/bin/tail [-lbcf] [file] |
| | /usr/xpg4/bin/tail [ -f | -r] [ -c number | -n number] [file] |
| | /usr/xpg4/bin/tail [ +- number
[ l | b | c] [f] ] [file] |
| | /usr/xpg4/bin/tail [ +- number [l]
[ f | r]] [file] |
| |
The tail utility copies the named file to the standard output beginning at a designated place. If no file is named, the standard input is used.
Copying begins at a point in the file indicated by the -cnumber, -nnumber, or +-number options (if +number is specified, begins at distance number from the beginning; if -number is
specified, from the end of the input; if number is NULL, the value 10 is assumed). number is counted
in units of lines or byte according to the -c or -n options, or lines, blocks, or bytes, according to the appended option l, b, or c. When no units are specified, counting is by lines.
|
| |
The following options are supported for both /usr/bin/tail and /usr/xpg4/bin/tail. The -r and -f options are mutually exclusive.
If both are specified on the command line, the -f option will be ignored.
- -b
- Units of blocks.
- -c
- Units of bytes.
- -f
- Follow. If the input-file is not a pipe, the program will not terminate after the line of the input-file has been copied, but will enter an
endless loop, wherein it sleeps for a second and then attempts to read and copy further records from the input-file. Thus it may be used to monitor the growth of a file that is being written by some other
process.
- -l
- Units of lines.
- -r
- Reverse. Copies lines from the specified starting point in the file in reverse order. The default for r is to print the entire
file in reverse order.
/usr/xpg4/bin/tail
| |
The following options are supported for /usr/xpg4/bin/tail only:
- -c number
- The number option-argument must be
a decimal integer whose sign affects the location in the file, measured in bytes, to begin the copying:
-
+
- Copying starts relative to the beginning of the file.
-
-
- Copying starts relative to the end of the file.
- none
- Copying starts relative to the end of the file.
The origin for counting is 1; that is, -c+1 represents the first byte of the file, -c-1 the last.
- -n number
- Equivalent to -cnumber, except the starting location in the file
is measured in lines instead of bytes. The origin for counting is 1; that is, -n+1 represents the first line of the file, -n-1 the last.
|
|
| |
The following operand is supported:
-
file
- A path name of an input file. If no file operands are specified,
the standard input will be used.
|
| |
See largefile(5) for the description of the behavior
of tail when encountering files greater than or equal to 2 Gbyte ( 231 bytes).
|
| | Example 1. Using the tail Command
| |
The following command will print the last ten lines of the file fred, followed by any lines that are appended to fred between the time tail
is initiated and killed.
The next command will print the last 15 bytes of the file fred, followed by any lines that are appended to fred between the time tail is initiated
and killed:
|
|
| |
See environ(5) for descriptions of the following environment
variables that affect the execution of tail: LC_CTYPE, LC_MESSAGES, and NLSPATH.
|
| |
The following exit values are returned:
-
0
- Successful completion.
-
>0
- An error occurred.
|
| |
See attributes(5) for descriptions of the following
attributes:
/usr/bin/tail
| |
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
| Availability | SUNWcsu |
| CSI | Enabled |
|
/usr/xpg4/bin/tail
| |
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
| Availability | SUNWxcu4 |
| CSI | Enabled |
|
|
| |
Piped tails relative to the end of the file are stored in a buffer, and thus are limited in length. Various kinds of anomalous behavior may happen with character special files.
|
| |
