| |
| | umask - get or set the file mode creation mask |
SYNOPSIS
| | /usr/bin/umask [-S] [mask] |
sh
csh
ksh
| |
The umask utility sets the file mode creation mask of the current shell execution
environment to the value specified by the mask operand. This mask affects the initial value of the file permission bits of subsequently created files. If umask is called in a subshell or separate utility execution environment, such as one of the following:
| |
(umask 002)
nohup umask ...
find . -exec umask ...
|
it does not affect the file mode creation mask of the caller's environment. For this reason, the /usr/bin/umask utility cannot be used to change the umask in an ongoing session. Its usefulness is limited to checking the caller's umask. To change the umask of an ongoing session you must use one of the shell builtins.
If the mask operand is not specified, the umask utility writes the value of the invoking process's file mode creation mask to standard output.
sh
| |
The user file-creation mode mask is set to ooo. The three octal digits refer to read/write/execute permissions for owner, group, and other, respectively (see chmod(1), chmod(2), and umask(2)). The value of each specified digit is subtracted from the corresponding ``digit'' specified by the system for the creation of a file (see creat(2)). For example, umask 022 removes write permission for group and other (files normally created
with mode 777 become mode 755; files created with mode 666 become mode 644).
- If ooo is omitted, the current value of the mask is printed.
-
umask is recognized and executed by the shell.
-
umask can be included in the user's .profile (see profile(4)) and invoked at login to automatically set the user's permissions on files or directories created.
|
csh
| |
See the description above for the Bourne shell (sh)umask built-in.
|
ksh
| |
The user file-creation mask is set to mask. mask can either be an octal number or a symbolic value as described in chmod(1). If a symbolic value is given, the new umask value is the complement of the result of applying mask to the complement of the previous umask value. If mask is omitted, the current value of the mask is printed.
|
|
| |
The following option is supported:
- -S
- Produces symbolic output.
The default output style is unspecified, but will be recognized on a subsequent invocation of umask on the same system as a mask operand to restore the previous file mode creation mask.
|
| |
The following operand is supported:
-
mask
- A string specifying the new file mode creation mask. The string is treated in the same way as the mode operand described in the chmod(1) manual page.
For a symbolic_mode value, the new value of the file mode creation mask is the logical complement of the file permission bits portion of the file mode specified by the symbolic_mode string.
In a symbolic_mode value, the permissions op characters + and - are interpreted relative to the current file mode creation mask. + causes the bits for the indicated permissions to be cleared in the mask. - causes the bits of the indicated permissions to be set in the mask.
The interpretation of mode values that specify file mode bits other than the file permission bits is unspecified.
The file mode creation mask is set to the resulting numeric value.
The default output of a prior invocation of umask on the same system with no operand will also be recognized as a mask operand. The use of an operand obtained in this way is not obsolescent, even if it is an octal number.
|
| |
When the mask operand is not specified, the umask utility will write a message to standard output that can later be used as a umask mask operand.
If -S is specified, the message will be in the following format:
| |
"u=%s,g=%s,o=%s\n", owner permissions, group permissions, \
other permissions
|
where the three values will be combinations of letters from the set {r, w, x}. The presence of a letter will indicate that the corresponding bit is clear in the file mode creation mask.
If a mask operand is specified, there will be no output written to standard output.
|
| | Example 1. Using the umask command
| |
Either of the commands:
| |
umask a=rx,ug+w
umask 002
|
sets the mode mask so that subsequently created files have their S_IWOTH bit cleared.
After setting the mode mask with either of the above commands, the umask command can be used to write the current value of the mode mask:
The output format is unspecified, but historical implementations use the obsolescent octal integer mode format.
| |
$ umask -S
u=rwx,g=rwx,o=rx
|
Either of these outputs can be used as the mask operand to a subsequent invocation of the umask utility.
Assuming the mode mask is set as above, the command:
sets the mode mask so that subsequently created files have their S_IWGRP and S_IWOTH bits cleared.
The command:
sets the mode mask so that subsequently created files have all their write bits cleared. Notice that mask operands r, w, x, or anything beginning with a hyphen (-), must be preceded by - to keep it from being interpreted as an option.
|
|
| |
See environ(5) for descriptions of the following environment variables that affect the execution of umask: LC_CTYPE, LC_MESSAGES, and NLSPATH.
|
| |
The following exit values are returned:
-
0
- The file mode creation mask was successfully changed, or no mask operand was supplied.
-
>0
- An error occurred.
|
| |
See attributes(5) for descriptions of the following attributes:
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
| Availability | SUNWcsu |
|
| |
