|
| kb - keyboard STREAMS module |
SYNOPSIS
|
#include <sys/vuid_event.h>
|
|
The kb STREAMS module processes byte streams generated by a keyboard attached to a CPU serial port. Definitions for altering keyboard translation and reading events from the keyboard are contained in <sys/kbio.h>
and <sys/kbd.h>.
The kb STREAMS module utilizes a set of keyboard tables to recognize which keys have been typed. Each translation table is an array of 128 16-bit words (unsigned shorts). If a table entry is less than 0x100, the entry is treated as an ISO 8859/1 character. Higher values indicate special characters that invoke more complicated actions.
Keyboard Translation Mode
|
The keyboard can be in one of the following translation modes:
-
TR_NONE
- Keyboard translation is turned off and up/down key codes are reported.
-
TR_ASCII
-
ISO 8859/1 codes are reported.
-
TR_EVENT
-
firm_events are reported.
-
TR_UNTRANS_EVENT
-
firm_events containing unencoded keystation codes are reported for all input events within the window system.
|
Keyboard Translation-Table Entries
|
All instances of the kb module share seven translation tables that convert raw keystation codes to event values. The tables are:
- Unshifted
- Used when a key is depressed and no shifts are in effect.
- Shifted
- Used when a key is depressed and a Shift key is held down.
- Caps Lock
- Used when a key is depressed and Caps Lock is in effect.
- Alt Graph
- Used when a key is depressed and the Alt Graph key is held down.
- Num Lock
- Used when a key is depressed and Num Lock is in effect.
- Controlled
- Used when a key is depressed and the Control key is held down. (Regardless of whether a Shift key or the Alt Graph is being held down, or whether Caps Lock or Num Lock is in effect).
- Key Up
- Used when a key is released.
Each key on the keyboard has a key station code that represents a number from 0 to 127. The number is used as an index into the translation table that is currently in effect. If the corresponding entry in the translation table is a value from 0 to 255, the value is treated as
an ISO 8859/1 character, and the character is the result of the translation.
If the entry in the translation table is higher than 255, it is a special entry. Special entry values are classified according to the value of the high-order bits. The high-order value for each class is defined as a constant, as shown below. When added to the constant, the value of the low-order
bits distinguish between keys within each class:
- SHIFTKEYS 0x100
- A shift key. The value of the particular shift key is added to determine which shift mask to apply:
-
CAPSLOCK 0
- Caps Lock key.
-
SHIFTLOCK 1
- "Shift Lock" key.
-
LEFTSHIFT 2
- Left-hand Shift key.
-
RIGHTSHIFT 3
- Right-hand Shift key.
-
LEFTCTRL 4
- Left-hand (or only) Control key.
-
RIGHTCTRL 5
- Right-hand Control key.
-
ALTGRAPH 9
- Alt Graph key.
-
ALT 10
- Alternate or Alt key.
-
NUMLOCK 11
- Num Lock key.
-
BUCKYBITS 0x200
- Used to toggle mode-key-up/down status without altering the value of an accompanying ISO 8859/1 character. The actual bit-position value, minus 7, is added.
-
METABIT 0
- The Meta key was pressed along with the key. This is the only user-accessible bucky bit. It is ORed in as the 0x80 bit; since this bit is a legitimate bit in a character, the only way to distinguish between,
for example, 0xA0 as META+0x20 and 0xA0 as an 8-bit character is to watch for META key up and META key down events and keep track of whether the META key was down.
-
SYSTEMBIT 1
- The System key was pressed. This is a place holder to indicate which key is the system-abort key.
-
FUNNY 0x300
- Performs various functions depending on the value of the low 4 bits:
-
NOP 0x300
- Does nothing.
-
OOPS 0x301
- Exists, but is undefined.
-
HOLE 0x302
- There is no key in this position on the keyboard, and the position-code should not be used.
-
RESET 0x306
- Keyboard reset.
-
ERROR 0x307
- The keyboard driver detected an internal error.
-
IDLE 0x308
- The keyboard is idle (no keys down).
-
COMPOSE 0x309
- The COMPOSE key; the next two keys should comprise a two-character COMPOSE key sequence.
-
NONL 0x30A
- Used only in the Num Lock table; indicates that this key is not affected by the Num Lock state, so that the translation table to use to translate this key should be the one that would have been used had Num Lock not
been in effect.
- 0x30B -- 0x30F
- Reserved for non-parameterized functions.
-
FA_CLASS 0x400
- A floating accent or "dead key." When this key is pressed, the next key generates an event for an accented character; for example, "floating accent grave" followed by the "a"
key generates an event with the ISO 8859/1 code for the "a with grave accent" character. The low-order bits indicate which accent; the codes for the individual "floating accents" are as follows:
-
FA_UMLAUT 0x400
- umlaut
-
FA_CFLEX 0x401
- circumflex
-
FA_TILDE 0x402
- tilde
-
FA_CEDILLA 0x403
- cedilla
-
FA_ACUTE 0x404
- acute accent
-
FA_GRAVE 0x405
- grave accent
-
STRING 0x500
- The low-order bits index a table of strings. When a key with a STRING entry is depressed, the characters in the null-terminated string for that key are sent, character-by-character.
The maximum length is defined as:
- KTAB_STRLEN
- 10
Individual string numbers are defined as:
- HOMEARROW
- 0x00
-
UPARROW
- 0x01
-
DOWNARROW
- 0x02
-
LEFTARROW
- 0x03
-
RIGHTARROW
- 0x04
String numbers 0x05 -- 0x0F are available for custom entries.
-
FUNCKEYS 0x600
- There are 64 keys reserved for function keys. The actual positions are usually on the left/right/top/bottom of the keyboard.
The next-to-lowest 4 bits indicate the group of function keys:
-
LEFTFUNC
- 0x600
-
RIGHTFUNC
- 0x610
-
TOPFUNC 0x610
- 0x610
-
BOTTOMFUNC
- 0x630
The low 4 bits indicate the function key number within the group:
- LF(n)
- (LEFTFUNC+(n)-1)
- RF(n)
- (RIGHTFUNC+(n)-1)
- TF(n)
- (TOPFUNC+(n)-1)
- BF(n)
- (BOTTOMFUNC+(n)-1)
-
PADKEYS 0x700
- A "numeric keypad key." These entries should appear only in the Num Lock translation table; when Num Lock is in effect, these events will be generated
by pressing keys on the right-hand keypad. The low-order bits indicate which key. The codes for the individual keys are:
-
PADEQUAL 0x700
- "=" key
-
PADSLASH 0x701
- "/" key
-
PADSTAR 0x702
- "*" key
-
PADMINUS 0x703
- "-" key
-
PADSEP 0x704
- "," key
-
PAD7 0x705
- "7" key
-
PAD8 0x706
- "8" key
-
PAD9 0x707
- "9" key
-
PADPLUS 0x708
- "+" key
-
PAD4 0x709
- "4" key
-
PAD5 0x70A
- "5" key
-
PAD6 0x70B
- "6" key
-
PAD1 0x70C
- "1" key
-
PAD2 0x70D
- "2" key
-
PAD3 0x70E
- "3" key
-
PAD0 0x70F
- "0" key
-
PADDOT 0x710
- "." key
-
PADENTER 0x711
- "Enter" key
When a function key is pressed in TR_ASCII mode, the following escape sequence is sent:
ESC[0....9z
where ESC is a single escape character and "0...9" indicates the decimal representation of the function-key value. For example, function key R1 sends the sequence:
ESC[208z
because the decimal value of RF(1) is 208. In TR_EVENT mode, if there is a VUID event code for the function key in question, an event with that event code is generated; otherwise, individual events for the characters of the
escape sequence are generated.
|
Keyboard Compatibility Mode
|
When started, the kb STREAMS module is in the compatibility mode. When the keyboard is in the TR_EVENT translation mode, ISO 8859/1 characters from the upper half of the character set (that is, characters
with the eighth bit set) , are presented as events with codes in the ISO_FIRST range (as defined in <<sys/vuid_event.h>>). For backwards compatibility with older versions of the keyboard driver, the event code is ISO_FIRST plus the character value. When compatibility mode is turned off, ISO 8859/1 characters are presented as events with codes equal to the character code.
|
|
|
The following ioctl() requests set and retrieve the current translation mode of a keyboard:
-
KIOCTRANS
- Pointer to an int. The translation mode is set to the value in the int pointed to by the argument.
-
KIOCGTRANS
- Pointer to an int. The current translation mode is stored in the int pointed to by the argument.
ioctl() requests for changing and retrieving entries from the keyboard translation table use the kiockeymap structure:
|
struct kiockeymap {
int kio_tablemask; /* Translation table (one of: 0, CAPSMASK,
* SHIFTMASK, CTRLMASK, UPMASK,
* ALTGRAPHMASK, NUMLOCKMASK)
*/
#define KIOCABORT1 -1 /* Special "mask": abort1 keystation */
#define KIOCABORT2 -2 /* Special "mask": abort2 keystation */
uchar_t kio_station; /* Physical keyboard key station (0-127) */
ushort_t kio_entry; /* Translation table station's entry */
char kio_string[10]; /* Value for STRING entries (null terminated) */
};
|
-
KIOCSKEY
- Pointer to a kiockeymap structure. The translation table entry referred to by the values in that structure is changed. The kio_tablemask request specifies which of the following translation tables contains the entry to be modified:
-
UPMASK 0x0080
- "Key Up" translation table.
-
NUMLOCKMASK 0x0800
- "Num Lock" translation table.
-
CTRLMASK 0x0030
- "Controlled" translation table.
-
ALTGRAPHMASK 0x0200
- "Alt Graph" translation table.
-
SHIFTMASK 0x000E
- "Shifted" translation table.
-
CAPSMASK 0x0001
- "Caps Lock" translation table.
- (No shift keys pressed or locked)
- "Unshifted" translation table.
The kio_station request specifies the keystation code for the entry to be modified. The value of kio_entry is stored in the entry in question. If kio_entry is between STRING and STRING+15, the string contained in kio_string is copied to the appropriate string table entry. This call may return EINVAL if there are invalid arguments.
Special values of kio_tablemask can affect the two step "break to the PROM monitor" sequence. The usual sequence is L1-a or Stop-. If kio_tablemask is KIOCABORT1, then the value of kio_station is set to be the first keystation in the sequence. If kio_tablemask, is KIOCABORT2 then the value of kio_station is set to be the
second keystation in the sequence. An attempt to change the "break to the PROM monitor" sequence without having superuser permission results in an EPERM error.
-
KIOCGKEY
- The argument is a pointer to a kiockeymap structure. The current value of the keyboard translation table entry specified by kio_tablemask
and kio_station is stored in the structure pointed to by the argument. This call may return EINVAL if there are invalid arguments.
-
KIOCTYPE
- The argument is a pointer to an int. A code indicating the type of the keyboard is stored in the int pointed to by the argument:
-
KB_SUN3
- Sun Type 3 keyboard
-
KB_SUN4
- Sun Type 4 keyboard
-
KB_ASCII
- ASCII terminal masquerading as keyboard
-
KB_PC
- Type 101 PC keyboard
-
KB_DEFAULT
- Stored in the int pointed to by the argument if the keyboard type is unknown. In case of error, -1 is stored in the int pointed to by the argument.
-
KIOCLAYOUT
- The argument is a pointer to an int. On a Sun Type 4 keyboard, the layout code specified by the keyboard's DIP switches
is stored in the int pointed to by the argument.
-
KIOCCMD
- The argument is a pointer to an int. The command specified by the value of the int pointed to by the argument is sent to the keyboard. The commands that can be sent are:
Commands to the Sun Type 3 and Sun Type 4 keyboards:
-
KBD_CMD_RESET
- Reset keyboard as if power-up.
-
KBD_CMD_BELL
- Turn on the bell.
-
KBD_CMD_NOBELL
- Turn off the bell.
-
KBD_CMD_CLICK
- Turn on the click annunciator.
-
KBD_CMD_NOCLICK
- Turn off the click annunciator.
Commands to the Sun Type 4 keyboard:
-
KBD_CMD_SETLED
- Set keyboard LEDs.
-
KBD_CMD_GETLAYOUT
- Request that keyboard indicate layout.
Inappropriate commands for particular keyboard types are ignored. Since there is no reliable way to get the state of the bell or click (because the keyboard cannot be queried and a process could do writes to the appropriate serial driver -- circumventing this ioctl() request)
an equivalent ioctl() to query its state is not provided.
-
KIOCSLED
- The argument is a pointer to an char. On the Sun Type 4 keyboard, the LEDs are set to the value specified in that char. The values for the four LEDs are:
-
LED_CAPS_LOCK
- "Caps Lock" light.
-
LED_COMPOSE
- "Compose" light.
-
LED_SCROLL_LOCK
- "Scroll Lock" light.
-
LED_NUM_LOCK
- "Num Lock" light.
On some Japanese layouts, the value for the fifth LED is:
-
LED_KANA
- "Kana" light.
-
KIOCGLED
- Pointer to a char. The current state of the LEDs is stored in the char pointed to by the argument.
-
KIOCSCOMPAT
- Pointer to an int. "Compatibility mode" is turned on if the int has a value of 1, and is turned off if the int has a value of 0.
-
KIOCGCOMPAT
- Pointer to an int. The current state of "compatibility mode" is stored in the int pointed to by the argument.
The following ioctl() request allows the default effect of the keyboard abort sequence to be changed.
-
KIOCSKABORTEN
- Pointer to an int. The keyboard abort sequence effect (typically L1-A or Stop-A on the keyboard on SPARC systems, F1-A on IA systems,
and BREAK on the serial console device) is enabled if the int has a value of KIOCABORTENABLE(1). If the value is KIOCABORTDISABLE(0) , the keyboard abort sequence effect is disabled. If the value is KIOCABORTALTERNATE(2), the Alternate Break sequence is in effect and is defined by the
serial console drivers zs(7D ) se(7D)
and asy(7D). Any other value of the parameter for this ioctl() is treated as enable. The Alternate Break sequence is applicable
to the serial console devices only. When the Alternate Break sequence is in effect, binary protocols including PPP, SLIP, file transfer and others should not be run over the console serial port.
This ioctl()will be active and retain state even if there is no physical keyboard in the system. The default effect (enable) causes the operating system to suspend and enter the kernel debugger (if present) or the system prom (on most systems with OpenBoot proms).
The default effect is enabled on most systems, but may be different on server systems with key switches in the 'secure' position. On these systems, the effect is always disabled when the key switch is in the 'secure' position. This ioctl()returns EPERM if the
caller is not the superuser.
These ioctl() requests are supported for compatibility with the system keyboard device /dev/kbd.
-
KIOCSDIRECT
- Has no effect.
-
KIOCGDIRECT
- Always returns 1.
|
|
See attributes(5) for descriptions of the following attributes:
ATTRIBUTE TYPE | ATTRIBUTE VALUE |
Interface Stability | Stable |
|
|
Many of the keyboards released after Sun Type 4 keyboard also report themselves as Sun Type 4 keyboard.
|
| |