|
Kernel Functions for Drivers | ddi_mem_rep_put8(9F) |
| ddi_mem_rep_put8, ddi_mem_rep_put16, ddi_mem_rep_put32, ddi_mem_rep_put64, ddi_mem_rep_putw, ddi_mem_rep_putl, ddi_mem_rep_putll, ddi_mem_rep_putb - write multiple data to mapped device in the memory space or
allocated DMA memory |
SYNOPSIS
|
#include <sys/ddi.h>
#include <sys/sunddi.h>
void ddi_mem_rep_put8(ddi_acc_handle_t handle, uint8_t *host_addr, uint8_t *dev_addr, size_t repcount, uint_t flags); |
| void ddi_mem_rep_put16(ddi_acc_handle_t handle, uint16_t *host_addr, uint16_t *dev_addr, size_t repcount, uint_t flags); |
| void ddi_mem_rep_put32(ddi_acc_handle_t handle, uint32_t *host_addr, uint32_t *dev_addr, size_t repcount, uint_t flags); |
| void ddi_mem_rep_put64(ddi_acc_handle_t handle, uint64_t *host_addr, uint64_t *dev_addr, size_t repcount, uint_t flags); |
|
Solaris DDI specific (Solaris DDI).
|
|
-
handle
- The data access handle returned
from setup calls, such as ddi_regs_map_setup(9F).
-
host_addr
- Base host address.
-
dev_addr
- Base device address.
-
repcount
- Number of data accesses to perform.
-
flags
- Device address flags:
-
DDI_DEV_AUTOINCR
- Automatically increment the device address, dev_addr, during data accesses.
-
DDI_DEV_NO_AUTOINCR
- Do not advance the device address, dev_addr, during data accesses.
|
|
These routines generate multiple writes to memory space or allocated DMA memory. repcount data
is copied from the host address, host_addr, to the
device address, dev_addr, in memory space. For
each input datum, the ddi_mem_rep_put8(), ddi_mem_rep_put16(), ddi_mem_rep_put32(), and ddi_mem_rep_put64() functions write 8 bits, 16 bits, 32 bits and
64 bits of data, respectively, to the device address. dev_addr and host_addr must be aligned to the
datum boundary described by the function.
Each individual datum will automatically be translated to maintain
a consistent view between the host and the device based on the encoded information
in the data access handle. The translation may involve byte-swapping if
the host and the device have incompatible endian characteristics.
When the flags argument is set to DDI_DEV_AUTOINCR, these functions will treat the device address, dev_addr, as a memory buffer location on the device and increments
its address on the next input datum. However, when the flags argument is set to DDI_DEV_NO_AUTOINCR,
the same device address will be used for every datum access. For example,
this flag may be useful when writing from a data register.
|
|
These functions can be called from user, kernel, or interrupt context.
|
|
The functions described in this manual page previously used symbolic
names which specified their data access size; the function names have been
changed so they now specify a fixed-width data size. See the following table
for the new name equivalents:
Previous Name | New Name |
ddi_mem_rep_putb | ddi_mem_rep_put8 |
ddi_mem_rep_putw | ddi_mem_rep_put16 |
ddi_mem_rep_putl | ddi_mem_rep_put32 |
ddi_mem_rep_putll | ddi_mem_rep_put64 |
|
| |