| |
| Kernel Functions for Drivers | ddi_rep_get8(9F) |
| | ddi_rep_get8, ddi_rep_get16, ddi_rep_get32, ddi_rep_get64, ddi_rep_getw, ddi_rep_getl, ddi_rep_getll, ddi_rep_getb - read data from the mapped memory address, device register or allocated DMA memory address |
SYNOPSIS
| |
#include <sys/ddi.h>
#include <sys/sunddi.h>
void ddi_rep_get8(ddi_acc_handle_t handle, uint8_t *host_addr, uint8_t *dev_addr, size_t repcount, uint_t flags); |
| | void ddi_rep_get16(ddi_acc_handle_t handle, uint16_t *host_addr, uint16_t *dev_addr, size_t repcount, uint_t flags); |
| | void ddi_rep_get32(ddi_acc_handle_t handle, uint32_t *host_addr, uint32_t *dev_addr, size_t repcount, uint_t flags); |
| | void ddi_rep_get64(ddi_acc_handle_t handle, uint64_t *host_addr, uint64_t *dev_addr, size_t repcount, uint_t flags); |
| |
Solaris DDI specific (Solaris DDI).
|
| |
-
handle
- The data access handle returned from setup calls, such as ddi_regs_map_setup(9F).
-
host_addr
- Base host address.
-
dev_addr
- Base device address.
-
repcount
- Number of data accesses to perform.
-
flags
- Device address flags:
-
DDI_DEV_AUTOINCR
- Automatically increment the device address, dev_addr, during data accesses.
-
DDI_DEV_NO_AUTOINCR
- Do not advance the device address, dev_addr, during data
accesses.
|
| |
These routines generate multiple reads from the mapped memory or device register. repcount data is copied from the device address, dev_addr,
to the host address, host_addr. For each input datum, the ddi_rep_get8(), ddi_rep_get16(), ddi_rep_get32(), and ddi_rep_get64() functions read 8 bits, 16 bits, 32 bits, and 64 bits of data, respectively, from the device address, dev_addr. dev_addr and host_addr must be aligned to the datum boundary described by the function.
Each individual datum will automatically be translated to maintain a consistent view between the host and the device based on the encoded information in the data access handle. The translation may
involve byte-swapping if the host and the device have incompatible endian characteristics.
When the flags argument is set to DDI_DEV_AUTOINCR, these functions treat the device address, dev_addr,
as a memory buffer location on the device and increment its address on the next input datum. However, when the flags argument is to DDI_DEV_NO_AUTOINCR, the same device address will be used for every datum access. For example, this flag may be useful when reading from a data register.
|
| |
These functions return the value read from the mapped address.
|
| |
These functions can be called from user, kernel, or interrupt context.
|
| |
The functions described in this manual page previously used symbolic names which specified their data access size; the function names have been changed so they now specify a fixed-width data size.
See the following table for the new name equivalents:
| Previous Name | New Name |
| ddi_rep_getb | ddi_rep_get8 |
| ddi_rep_getw | ddi_rep_get16 |
| ddi_rep_getl | ddi_rep_get32 |
| ddi_rep_getll | ddi_rep_get64 |
|
| |
