|
Kernel Functions for Drivers | scsi_hba_init(9F) |
| scsi_hba_init, scsi_hba_fini - SCSI Host Bus Adapter system initialization and completion routines |
SYNOPSIS
|
#include <sys/scsi/scsi.h>
int scsi_hba_init(struct modlinkage *modlp); |
| void scsi_hba_fini(struct modlinkage *modlp); |
|
Solaris architecture specific (Solaris DDI).
|
|
-
modlp
- Pointer to the Host Bus Adapters module linkage structure.
|
|
scsi_hba_init
|
scsi_hba_init() is the system-provided initialization routine for SCSI HBA drivers. The scsi_hba_init() function registers
the HBA in the system and allows the driver to accept configuration requests on behalf of SCSI target drivers. The scsi_hba_init() routine must be
called in the HBA's _init(9E) routine before mod_install(9F) is called. If mod_install(9F) fails, the HBA's _init(9E) should call scsi_hba_fini() before returning failure.
|
scsi_hba_fini
|
scsi_hba_fini() is the system provided completion routine for SCSI HBA drivers. scsi_hba_fini() removes all of the system
references for the HBA that were created in scsi_hba_init(). The scsi_hba_fini() routine should be called in the HBA's _fini(9E) routine if mod_remove(9F) is successful.
|
|
|
scsi_hba_init() returns 0 if successful, and a non-zero value otherwise. If scsi_hba_init() fails, the HBA's _init()
entry point should return the value returned by scsi_hba_init().
|
|
scsi_hba_init() and scsi_hba_fini() should be called from _init(9E) or _fini(9E),
respectively.
|
|
The HBA is responsible for ensuring that no DDI request routines are called on behalf of its SCSI target drivers once scsi_hba_fini() is called.
|
| |